Fairshare is a mechanism which allows historical resource utilization information to be incorporated into job feasibility and priority decisions. Maui's fairshare implementation allows site administrators to set system utilization targets for users, groups, accounts, classes, and QOS levels.
Fairshare allows historical resource utilization information to be incorporated into job feasibility and priority decisions. This feature allows site administrators to set system utilization targets for users, groups, accounts, classes, and QOS levels. Administrators can also specify the timeframe over which resource utilization is evaluated in determining whether or not the goal is being reached. Parameters allow sites to specify the utilization metric, how historical information is aggregated, and the effect of fairshare state on scheduling behavior. Fairshare targets can be specified for any credentials (i.e., user, group, class, etc) which administrators wish to have affected by this information.
Fairshare is configured at two levels. First, at a system level, configuration is required to determine how fairshare usage information is to be collected and processed. Secondly, some configuration is required at the credential level to determine how this fairshare information affects particular jobs. The system level parameters are listed below:
As Maui runs, it records how available resources are being utilized. Each iteration (RMPOLLINTERVAL seconds) it updates fairshare resource utilization statistics. Resource utilization is tracked in accordance with the FSPOLICY parameter allowing various aspects of resource consumption information to be measured. This parameter allows selection of both the types of resources to be tracked and the method of tracking. It provides the option of tracking usage by dedicated or consumed resources, where dedicated usage tracks what the scheduler assigns to the job and consumed usage tracks what the job actually uses.
An example may clarify the use of the FSPOLICY parameter. Assume a 4 processor job is running a parallel '/bin/sleep' for 15 minutes. It will have a dedicated fairshare usage of 1 proc-hour but a consumed fairshare usage of essentially nothing since it did not consume anything. Most often, dedicated fairshare usage is used on dedicated resource platforms while consumed tracking is used in shared SMP environments.
By default, when comparing fairshare usage against fairshare targets, Maui will calculate the fairshare component of priority as a difference between fairshare target and fairshare usage. To change the fairshare priority component to be calculated as a ratio (1 - fairshare usage/fairshare target) a '%' (percent) character can be specified at the end of the FSPOLICY value.
When configuring fairshare, it is important to determine the proper timeframe that should be considered. Many sites choose to incorporate historical usage information from the last one to two weeks while others are only concerned about the events of the last few hours. The correct setting is very site dependent and usually incorporates both average job turnaround time and site mission policies.
With Maui's fairshare system, time is broken into a number of distinct fairshare windows. Sites configure the amount of time they wish to consider by specifying two parameters, FSINTERVAL, and FSDEPTH. The FSINTERVAL parameter specifies the duration of each window while the FSDEPTH parameter indicates the number of windows to consider. Thus, the total time evaluated by fairshare is simply FSINTERVAL * FSDEPTH.
Many sites want to limit the impact of fairshare data according to its age. The FSDECAY parameters allows this to be done, causing the most recent fairshare data to contribute more to a credential's total fairshare usage than older data. This parameter is specified as a standard decay factors which is applied to the fairshare data. Generally, decay factors are specified as a value between 1 and 0 where a value of 1 (the default) indicates no decay should be specified. The smaller the number, the more rapid the decay using the calculation WeightedValue = Value * <DECAY> ^ <N> where <N> is the window number. The table below shows the impact of a number of commonly used decay factors on the percentage contribution of each fairshare window.
While selecting how the total fairshare timeframe is broken up between the number and length of windows is a matter of preference, it is important to note that more windows will cause the decay factor to degrade the contribution of aged data more quickly.
Using the selected fairshare usage metric, Maui continues to update the current fairshare window until it reaches a fairshare window boundary, at which point it rolls the fairshare window and begins updating the new window. The information for each window is stored in its own file located in the Maui statistics directory. Each file is named 'FS.<EPOCHTIME>' where <EPOCHTIME> is the time the new fairshare window became active. Each window contains utilization information for each entity as well as for total usage. A sample fairshare data file is shown below:
Note that the total processor hours consumed in this time interval is 600,000 processor seconds. Since every job in this example scenario had a user, group, account, and QOS assigned to it, the sum of the usage of all members of each category should equal the total usage value (i.e., USERA + USERB + ... + USERD = GROUPA + GROUPB = ACCTA + ... + ACCTC = QOS0 + ... + QOS2 = TOTAL)
When Maui needs to determine current fairshare usage for a particular credential, it calculates a decay-weighted average of the usage information for that credential using the most recent fairshare intervals where the number of windows evaluated is controlled by the FSDEPTH parameter. For example, if the credential of interest is user John and the following parameters are set,
and the fairshare data files contain the following usage amounts for the entity of interest:
The current fairshare usage for user John would calculated as follows:
Usage = (60 + .5^1 * 0 + .5^2 * 10 + .5^3 * 50) / (110 + .5^1*125 + .5^2*100 + .5^3*150)
Note that the current fairshare usage is relative to the actual resources delivered by the system over the timeframe evaluated, not the resources available or configured during that time.
Historical fairshare data is organized into a number of data files, each file containing the information for a length of time as specified by the FSINTERVAL parameter. Although FSDEPTH, FSINTERVAL, and FSDECAY can be freely and dynamically modified, such changes may result in unexpected fairshare status for a period of time as the fairshare data files with the old FSINTERVAL setting are rolled out.
With the mechanism used to determine current fairshare usage explained above, the next step is using this information to affect scheduling behavior. As mentioned in the Fairshare Overview, sites have the ability to configure how fairshare information impacts scheduling behavior. This is done through specification of the fairshare targets. These targets allow fairshare information to either affect job feasibility or job priority.
184.108.40.206 Priority Based Fairshare
The most commonly used type of fairshare is priority based fairshare. In this mode, fairshare information does not affect whether or not a job can run, but rather only affects the job's priority relative to other jobs. In most cases, this is the desired behavior. Using the standard fairshare target, the priority of jobs of a particular user which has used too many resources over the specified fairshare window is lowered. Also, the standard fairshare target will increase the priority of jobs which have not received enough resources.
While the standard fairshare target is the most commonly used, Maui also provides the ability to specify fairshare caps and floors. These targets are like the default target only caps only adjust priority down when usage is too high and floors only adjust priority up when usage is too low.
Since fairshare usage information must be integrated with with Maui's overall priority mechanism, it is critical that the corresponding fairshare priority weights be set. Specifically, the FSWEIGHT component weight parameter and the target type subcompoent weight (i.e., FSUSERWEIGHT, FSGROUPWEIGHT, etc) be specified. If these weights are not set, the fairshare mechanism will be enabled but have no effect on scheduling behavior! See the Priority Component Overview for more information on setting priority weights.
220.127.116.11 Feasibility Based Fairshare
In addition to the standard priority fairshare targets, Maui also allows a site to specify fairshare caps. A cap is specified as either a hard absolute number of cycles allowed during the fairshare window or as a percentage of total cycles delivered. If the fairshare cap is reached or exceeded, the job is not allowed to run even if there are resources available.
|© 2001-2010 Adaptive Computing Enterprises, Inc.|