[torqueusers] hwloc error torque 4.1.3
Andrus, Brian Contractor
bdandrus at nps.edu
Thu Dec 13 15:30:43 MST 2012
Yep, the default locations for the hwloc libs are /usr/include and /usr/lib and /usr/lib64
Naval Postgraduate School
From: torqueusers-bounces at supercluster.org [mailto:torqueusers-bounces at supercluster.org] On Behalf Of David Beer
Sent: Thursday, December 13, 2012 1:51 PM
To: Torque Users Mailing List
Subject: Re: [torqueusers] hwloc error torque 4.1.3
Have you made sure you are specifying --with-hwloc-path correctly? /usr/ seems unlikely to be correct. Note the coment that configure adds:
Specifies the path to the hwloc libraries and include files.
Example: ./configure --with-hwloc-path=/usr/local/hwloc-1.1
Will specify that the include files are in /usr/local/hwloc-1.1/include and
the libraries are in /usr/local/hwloc-1.1/lib],
So specifying /usr would mean that
/usr/include contains the hwloc headers and /usr/lib/ contains the library.
On Thu, Dec 13, 2012 at 2:29 PM, Andrus, Brian Contractor <bdandrus at nps.edu<mailto:bdandrus at nps.edu>> wrote:
It seems fine:
[root at build SPECS]# pkg-config --atleast-version 1.1 hwloc && echo "Yep." || echo "Nope."
Dies with the same message:
checking for HWLOC... configure: error: cpuset support requires the hwloc package
This can be solved by configuring with --with-hwloc-path=<path>. This path
should be the path to the directory containing the lib/ and include/ directories
for your version of hwloc.
Another option is adding the directory containing 'hwloc.pc'
to the PKG_CONFIG_PATH environment variable.
If you have done these and still get this error, try running ./autogen.sh and
then configuring again.
Same if I do:
./configure --enable-cpuset --with-hwloc-path=/usr/
Naval Postgraduate School
> -----Original Message-----
> From: torqueusers-bounces at supercluster.org<mailto:torqueusers-bounces at supercluster.org> [mailto:torqueusers-<mailto:torqueusers->
> bounces at supercluster.org<mailto:bounces at supercluster.org>] On Behalf Of Michael Jennings
> Sent: Monday, December 10, 2012 1:36 PM
> To: Torque Users Mailing List
> Subject: Re: [torqueusers] hwloc error torque 4.1.3
> On Monday, 10 December 2012, at 19:37:18 (+0000), Andrus, Brian Contractor
> > Same thing in config.log:
> > -------------------
> > configure:22377: checking for HWLOC
> > configure:22476: error: cpuset support requires the hwloc package
> It's a pretty straight-forward test; either pkgconfig finds hwloc >= 1.1, or it
> For me, installing hwloc-devel.x86_64 worked just fine. I, too, am using a
> rebuild of RHEL 6.3 (Scientific Linux).
> What does this command tell you?
> pkg-config --atleast-version 1.1 hwloc && echo "Yep." || echo "Nope."
> Michael Jennings <mej at lbl.gov<mailto:mej at lbl.gov>>
> Senior HPC Systems Engineer
> High-Performance Computing Services
> Lawrence Berkeley National Laboratory
> Bldg 50B-3209E W: 510-495-2687<tel:510-495-2687>
> MS 050B-3209 F: 510-486-8615<tel:510-486-8615>
> torqueusers mailing list
> torqueusers at supercluster.org<mailto:torqueusers at supercluster.org>
torqueusers mailing list
torqueusers at supercluster.org<mailto:torqueusers at supercluster.org>
David Beer | Senior Software Engineer
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the torqueusers