[torqueusers] Help: Unauthorized Request

Aaron T Perry atp42 at cornell.edu
Tue Sep 27 13:18:57 MDT 2011


I gave the virtual machine half of the system memory, but give how much RAM
is being used that's probably not enough. I'll try this, thanks for the
suggestions!

-Aaron

On Tue, Sep 27, 2011 at 3:14 PM, Coyle, James J [ITACD] <jjc at iastate.edu>wrote:

>   If you continue to have problems, I woud  check if this is really a
> problem with the Virtual environment.****
>
> ** **
>
>   I would suggest creating a liveUSB stick with a linux distribution on
> it.  ****
>
> ** **
>
> I’ve used LinuxLive USB Creator:  http://www.linuxliveusb.com/****
>
> ** **
>
> to create a bootable USB thumbdrive.****
>
> ** **
>
> I chose 8GB, and did not have to be picky about the number of packages I
> use.****
>
> ** **
>
> The installer runs on Windows, and will create a Linux distribution (I use
> fedora) on a new thumb drive.****
>
> It has a GUI interface, and you don’t need special knowledge other than
> knowing about Unix.****
>
> (The persistent image is the portiona that you can use to make updates to
> your install, I made that 2GB ****
>
> on my 8GB stick.)****
>
> ** **
>
>   Pick as many packages as you think that you need, and they will be
> downloaded and installed.  If you****
>
> need something later, you can use yum to install it.****
>
> ** **
>
> E.g.  ****
>
> ** **
>
>   yum install gcc-gfortran boost boost-devel java*****
>
> ** **
>
> ** **
>
>   If your computer’s boot order is set to boot from a removable drive
> before a far disk,****
>
> you can just reboot the computer and it should boot from USB.  If this is
> not set,****
>
> you can interrupt the boot processes when it says something like BOOT ORDER
> F12****
>
> by pressing the F12 key, and then selecting the USB drive.****
>
> ** **
>
>   You can run off the USB drive and it will not affect you machine at all,
> just shutdown, ****
>
> pull the USB stick, and power up and your back in Windows again.****
>
> ** **
>
>   This could check whether the problem is with gcc or with the Virtual
> machine (did you make the virtual machine with enough memory?)****
>
> ** **
>
> ** **
>
> James Coyle, PhD****
>
> High Performance Computing Group        ****
>
>  Iowa State Univ.          ****
>
> web: http://jjc.public.iastate.edu/ <http://www.public.iastate.edu/~jjc>**
> **
>
> ** **
>
> ** **
>
> ** **
>
> *From:* torqueusers-bounces at supercluster.org [mailto:
> torqueusers-bounces at supercluster.org] *On Behalf Of *Aaron T Perry
> *Sent:* Tuesday, September 27, 2011 1:55 PM
>
> *To:* Torque Users Mailing List
> *Subject:* Re: [torqueusers] Help: Unauthorized Request****
>
> ** **
>
> Thank you, I'll try these suggestions. I'm relatively new at this and
> sometimes feel I'm in over my head.****
>
> ** **
>
> I'm almost certain this is a compiler or stack limit error. I didn't write
> the code, and it's known to work on a variety of systems but
> only commercial compilers are officially supported (i'm using gcc).****
>
> ** **
>
> Thank you again,****
>
> Aaron****
>
> ** **
>
> On Tue, Sep 27, 2011 at 2:45 PM, Coyle, James J [ITACD] <jjc at iastate.edu>
> wrote:****
>
> For just one computer, which write the following script files (assumes you
> have 256GB of memory,****
>
> modify as needed.)****
>
>  ****
>
> scr0:****
>
> #!/bin/bash****
>
>  ****
>
> for j in 1G 2G 4G 8G 16G 32G 64G 128G 256G ; do****
>
> echo “Try $j “****
>
> ./scr1  $j****
>
> done ****
>
> exit****
>
>  ****
>
>  ****
>
>  ****
>
> scr1:****
>
> #!/bin/csh –f****
>
>  ****
>
> setenv F t1.$$****
>
> /bin/rm –f $F****
>
> hostname >  $F****
>
> limit stacksize $1****
>
> mpirun –n 4 -–machinefile $F ./ccsm.exe****
>
> /bin/rm –f $F****
>
> exit****
>
>  ****
>
>  ****
>
> make both executable with ****
>
> chmod u+x scr0 scr1****
>
>  ****
>
>  ****
>
> and then issue ****
>
>  ****
>
>   ./scr0****
>
>  ****
>
>  ****
>
> Modify the above procedure as needed.****
>
>  ****
>
>   If this is not just caused by a stack limit error, I’d look at either a
> compiler optimization bug (recompile run with –O0****
>
> and run) or more likely a programming error (we all make them.)****
>
>  ****
>
>   I’d recompile and check for bounds (e.g. –C on most Fortran compilers),
> and uninitialized variables (-uvar on****
>
> PathScale or Open64 compilers.  –rabc also works well on Cray Compilers.**
> **
>
>  ****
>
>   You can also use a parallel debugger like Totalview or DDT, or you can
> use a run-time error detection tool****
>
> like MPI-CHECK (Fortran only) or Marmot.  (See
> http://rted.public.iastate.edu/MPI/RESULTS/result_table.html****
>
> for the kinds of errors that these can catch)  See
> http://rted.public.iastate.edu/Serial/RESULTS/result_table.html ****
>
> for program errors other than those involving MPI routines.  If you click
> on items under the****
>
> OS/Compiler/Runtime tool column, you can see the suggested compiler options
> for best debugging****
>
> for that Compiler or tool.****
>
>  ****
>
>  ****
>
>  ****
>
>  ****
>
>  ****
>
> *From:* torqueusers-bounces at supercluster.org [mailto:
> torqueusers-bounces at supercluster.org] *On Behalf Of *Aaron T Perry
> *Sent:* Tuesday, September 27, 2011 12:23 PM****
>
>
> *To:* Torque Users Mailing List****
>
> *Subject:* Re: [torqueusers] Help: Unauthorized Request****
>
>  ****
>
> Yes, that I do i have, that was the first thing I came across when looking
> through help online.****
>
>  ****
>
> And I added the nodes file with appropriate settings for my machine, but I
> still get the same errors.****
>
>  ****
>
> I have a completely unrelated question. I'm doing all this to run a model
> that I've been trying to port. I'm trying to figure out whether a
> segmentation fault I'm getting at runtime (using mpirun ./ccsm.exe) is due
> to a compiler error, or a stack/memory error (the code works on many other
> machines, not necessarily the compiler I'm using though). If I can install
> torque I can use an automated script that also sets appropriate stack size,
> among other things. I am on 1 computer, with 1 node, and I have no desire to
> scale this instance of the model. Basically I'm wondering if you think there
> might be an easier/better alternative? ****
>
>  ****
>
> Thank you,****
>
> Aaron****
>
>  ****
>
> On Tue, Sep 27, 2011 at 1:04 PM, Smith, Jerry Don II <jdsmit at sandia.gov>
> wrote:****
>
> $PBS_HOME/server_priv/nodes needs to encompass your compute nodes****
>
>  ****
>
> node1 np=4 # or however many cores you have****
>
> node2 np=4****
>
>  ****
>
> Make sure that those nodes can be resolved via those names from the admin
> node.****
>
>  ****
>
> Do you have $PBS_HOME/server_name file with the resolvable name of your
> admin server?****
>
>  ****
>
> -Jerry****
>
>  ****
>
> *From: *Aaron T Perry <atp42 at cornell.edu>
> *Reply-To: *Torque Users Mailing List <torqueusers at supercluster.org>****
>
> *Date: *Tue, 27 Sep 2011 12:58:50 -0400****
>
>
> *To: *Torque Users Mailing List <torqueusers at supercluster.org>
> *Subject: *Re: [torqueusers] Help: Unauthorized Request****
>
>  ****
>
> I think I have, I needed to create the file, and I was unsure about the
> formatting required. ****
>
> This is what I have there.****
>
>  ****
>
> # + + ubuntu atp42****
>
>  ****
>
> Do I also need to create the nodes file in the torque>server_priv
> directory?****
>
>  ****
>
> Thanks,****
>
> Aaron****
>
>  ****
>
> On Tue, Sep 27, 2011 at 12:40 PM, Smith, Jerry Don II <jdsmit at sandia.gov>
> wrote:****
>
> Have you set up hosts.equiv?****
>
>  ****
>
> see: http://www.clusterresources.com/torquedocs/1.3advconfig.shtml****
>
>  ****
> 1.3.2.1 Server Configuration Overview****
>
> There are several steps to ensure that the server and the nodes are
> completely aware of each other and able to communicate directly. Some of
> this configuration takes place within TORQUE directly using the *qmgr*command. Other configuration settings are managed using the
> *pbs_server*nodes file, DNS files such as /etc/hosts and the
> /etc/hosts.equiv file.****
> 1.3.2.2 Name Service Configuration****
>
> Each node, as well as the server, must be able to resolve the name of every
> node with which it will interact. This can be accomplished using
> /etc/hosts, *DNS*, *NIS*, or other mechanisms. In the case of /etc/hosts,
> the file can be shared across systems in most cases.****
>
>  ****
>
> -Jerry****
>
>  ****
>
> *From: *Aaron T Perry <atp42 at cornell.edu>
> *Reply-To: *Torque Users Mailing List <torqueusers at supercluster.org>****
>
> *Date: *Tue, 27 Sep 2011 12:33:31 -0400 ****
>
>
> *To: *Torque Users Mailing List <torqueusers at supercluster.org>****
>
> *Subject: *Re: [torqueusers] Help: Unauthorized Request****
>
>  ****
>
> With the execption of the unauthorized request entries it looks like almost
> everything is okay, execpt for the node file and root <at> localhost (this
> should be root <at> ubuntu. ****
>
>  ****
>
> Thank you for your help!****
>
> Aaron****
>
>  ****
>
> Here is an except from the server log...****
>
>  ****
>
> 09/27/2011 09:51:31;0002;PBS_Server;Svr;Log;Log opened****
>
> 09/27/2011 09:51:31;0006;PBS_Server;Svr;PBS_Server;Server ubuntu started,
> initialization type = 4****
>
> 09/27/2011 09:51:42;0002;PBS_Server;Svr;Log;Log opened****
>
> 09/27/2011 09:51:42;0006;PBS_Server;Svr;PBS_Server;Server ubuntu started,
> initialization type = 4****
>
> 09/27/2011 09:51:44;0002;PBS_Server;Svr;Act;Account file
> /var/spool/torque/server_priv/accounting/20110927 opened****
>
> 09/27/2011 09:51:44;0040;PBS_Server;Req;setup_nodes;setup_nodes()****
>
> 09/27/2011 09:51:44;0004;PBS_Server;Svr;ubuntu;cannot open node description
> file '/var/spool/torque/server_priv/nodes' in setup_nodes()****
>
> 09/27/2011 09:51:44;0002;PBS_Server;Svr;PBS_Server;Expected 0, recovered 0
> queues****
>
> 09/27/2011 09:51:44;0002;PBS_Server;Svr;PBS_Server;Expected 0, recovered 0
> jobs****
>
> 09/27/2011 09:51:44;0006;PBS_Server;Svr;PBS_Server;Using ports Server:15001
>  Scheduler:15004  MOM:15002 (server: 'ubuntu')****
>
> 09/27/2011 09:51:44;0002;PBS_Server;Svr;daemonize_server;INFO:      parent
> is exiting****
>
> 09/27/2011 09:51:44;0002;PBS_Server;Svr;daemonize_server;INFO:      parent
> is exiting****
>
> 09/27/2011 09:51:44;0002;PBS_Server;Svr;daemonize_server;INFO:      child
> process in background****
>
> 09/27/2011 09:51:44;0002;PBS_Server;Svr;PBS_Server;Server Ready, pid =
> 11995, loglevel=0****
>
> 09/27/2011 09:51:44;0080;PBS_Server;Req;req_reject;Reject reply
> code=15007(Unauthorized Request ), aux=0, type=Manager, from root at localhost
> ****
>
> 09/27/2011 09:51:44;0080;PBS_Server;Req;req_reject;Reject reply
> code=15007(Unauthorized Request ), aux=0, type=Manager, from root at localhost
> ****
>
> 09/27/2011 09:51:44;0080;PBS_Server;Req;req_reject;Reject reply
> code=15007(Unauthorized Request ), aux=0, type=Manager, from root at localhost
> ****
>
> 09/27/2011 09:51:44;0080;PBS_Server;Req;req_reject;Reject reply
> code=15007(Unauthorized Request ), aux=0, type=Manager, from root at localhost
> ****
>
> 09/27/2011 09:51:44;0080;PBS_Server;Req;req_reject;Reject reply
> code=15007(Unauthorized Request ), aux=0, type=Manager, from root at localhost
> ****
>
> 09/27/2011 09:51:44;0080;PBS_Server;Req;req_reject;Reject reply
> code=15007(Unauthorized Request ), aux=0, type=Manager, from root at localhost
> ****
>
> 09/27/2011 09:51:44;0080;PBS_Server;Req;req_reject;Reject reply
> code=15007(Unauthorized Request ), aux=0, type=Manager, from root at localhost
> ****
>
> 09/27/2011 09:51:44;0080;PBS_Server;Req;req_reject;Reject reply
> code=15007(Unauthorized Request ), aux=0, type=Manager, from root at localhost
> ****
>
> 09/27/2011 09:51:44;0080;PBS_Server;Req;req_reject;Reject reply
> code=15007(Unauthorized Request ), aux=0, type=Manager, from root at localhost
> ****
>
> 09/27/2011 09:51:44;0080;PBS_Server;Req;req_reject;Reject reply
> code=15007(Unauthorized Request ), aux=0, type=Manager, from root at localhost
> ****
>
> 09/27/2011 09:51:44;0080;PBS_Server;Req;req_reject;Reject reply
> code=15007(Unauthorized Request ), aux=0, type=Manager, from root at localhost
> ****
>
> 09/27/2011 09:51:44;0080;PBS_Server;Req;req_reject;Reject reply
> code=15007(Unauthorized Request ), aux=0, type=Manager, from root at localhost
> ****
>
> 09/27/2011 09:51:49;0002;PBS_Server;Svr;PBS_Server;Torque Server Version =
> 3.0.2, loglevel = 0****
>
> 09/27/2011 09:56:49;0002;PBS_Server;Svr;PBS_Server;Torque Server Version =
> 3.0.2, loglevel = 0****
>
> ...****
>
>  ****
>
> On Tue, Sep 27, 2011 at 12:13 PM, Smith, Jerry Don II <jdsmit at sandia.gov>
> wrote:****
>
> Are you seeing anything in the pbs_server logs?****
>
>  ****
>
> -Jerry****
>
>  ****
>
> *From: *Aaron T Perry <atp42 at cornell.edu>
> *Reply-To: *Torque Users Mailing List <torqueusers at supercluster.org>
> *Date: *Tue, 27 Sep 2011 09:53:28 -0400
> *To: *<torqueusers at supercluster.org>
> *Subject: *Re: [torqueusers] Help: Unauthorized Request****
>
>  ****
>
> Please, any help you can give would be greatly appreciated, I'm completely
> stuck. All the solutions I found online have failed. ****
>
> On Mon, Sep 26, 2011 at 2:35 PM, Aaron <atp42 at cornell.edu> wrote:****
>
> Hi, ****
>
>  ****
>
> I've just tried to install torque, and I ran the following commands,****
>
>  ****
>
> ./configure****
>
> sudo make****
>
> sudo make install****
>
>  ****
>
> however when I run ./torque.setup username I get the following...****
>
>  ****
>
> initializing TORQUE (admin: username at ubuntu)****
>
> PBS_Server ubuntu: Create mode and server database exists, ****
>
> do you wish to continue y/(n)?y****
>
> Max open servers: 9****
>
> qmgr obj= svr=default: Unauthorized Request ****
>
> Max open servers: 9****
>
> qmgr obj= svr=default: Unauthorized Request ****
>
> qmgr obj= svr=default: Unauthorized Request ****
>
> qmgr obj= svr=default: Unauthorized Request ****
>
> qmgr obj= svr=default: Unauthorized Request ****
>
> qmgr obj=batch svr=default: Unauthorized Request ****
>
> qmgr obj=batch svr=default: Unauthorized Request ****
>
> qmgr obj=batch svr=default: Unauthorized Request ****
>
> qmgr obj=batch svr=default: Unauthorized Request ****
>
> qmgr obj=batch svr=default: Unauthorized Request ****
>
> qmgr obj=batch svr=default: Unauthorized Request ****
>
> qmgr obj= svr=default: Unauthorized Request ****
>
>  ****
>
> The server lanched and I cannot stop it, nor can issue any command related
> to torque (qterm, gmgr, qsub, etc) under my current username or under root.
> Help!****
>
>  ****
>
> Thank you,****
>
> -Aaron****
>
>  ****
>
>  ****
>
> _______________________________________________ torqueusers mailing list
> torqueusers at supercluster.org
> http://www.supercluster.org/mailman/listinfo/torqueusers ****
>
>
> _______________________________________________
> torqueusers mailing list
> torqueusers at supercluster.org
> http://www.supercluster.org/mailman/listinfo/torqueusers****
>
>  ****
>
> _______________________________________________ torqueusers mailing list
> torqueusers at supercluster.org
> http://www.supercluster.org/mailman/listinfo/torqueusers ****
>
>
> _______________________________________________
> torqueusers mailing list
> torqueusers at supercluster.org
> http://www.supercluster.org/mailman/listinfo/torqueusers****
>
>  ****
>
> _______________________________________________ torqueusers mailing list
> torqueusers at supercluster.org
> http://www.supercluster.org/mailman/listinfo/torqueusers ****
>
>
> _______________________________________________
> torqueusers mailing list
> torqueusers at supercluster.org
> http://www.supercluster.org/mailman/listinfo/torqueusers****
>
>  ****
>
>
> _______________________________________________
> torqueusers mailing list
> torqueusers at supercluster.org
> http://www.supercluster.org/mailman/listinfo/torqueusers****
>
> ** **
>
> _______________________________________________
> torqueusers mailing list
> torqueusers at supercluster.org
> http://www.supercluster.org/mailman/listinfo/torqueusers
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.supercluster.org/pipermail/torqueusers/attachments/20110927/5e514f30/attachment-0001.html 


More information about the torqueusers mailing list