[torqueusers] help! torque-2.2.1 will not build

Brock Palen brockp at umich.edu
Sat Nov 3 21:28:31 MDT 2007


Wait sorry to jump in, but wasn't cpuset support for the old  
libcpuset and thus very broken on the current stuff?
I know we would LOVE libcpuset support on our Altix we just go  
without right now,  Or am i way off base ....

Brock Palen
Center for Advanced Computing
brockp at umich.edu
(734)936-1985


On Nov 3, 2007, at 11:15 PM, Steven DuChene wrote:

> Garrick Staples wrote:
>> On Sat, Nov 03, 2007 at 06:14:39PM -0700, Garrick Staples alleged:
>>
>>> Looks like something wrong with the Makefile.  Can you change:
>>>    SUBDIRS = $(cpuset)
>>> to:
>>>    SUBDIRS = $(cpusetdir)
>>> in src/resmom/linux/Makefile.in and run configure again?
>>>
>>
>>
>> Err, that should be:
>>    SUBDIRS = $(csetsubdir)
>>    
>> --------------------------------------------------------------------- 
>> ---
>>
>>
> See attached Makefile that was generated by the configure run
>
> # Makefile.in generated by automake 1.9.2 from Makefile.am.
> # src/resmom/linux/Makefile.  Generated from Makefile.in by configure.
>
> # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
> # 2003, 2004  Free Software Foundation, Inc.
> # This Makefile.in is free software; the Free Software Foundation
> # gives unlimited permission to copy and/or distribute it,
> # with or without modifications, as long as this notice is preserved.
>
> # This program is distributed in the hope that it will be useful,
> # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
> # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
> # PARTICULAR PURPOSE.
>
>
>
> SOURCES = $(libmommach_a_SOURCES)
>
> srcdir = .
> top_srcdir = ../../..
>
> pkgdatadir = $(datadir)/torque
> pkglibdir = $(libdir)/torque
> pkgincludedir = $(includedir)/torque
> top_builddir = ../../..
> am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
> INSTALL = /usr/bin/install -c
> install_sh_DATA = $(install_sh) -c -m 644
> install_sh_PROGRAM = $(install_sh) -c
> install_sh_SCRIPT = $(install_sh) -c
> INSTALL_HEADER = $(INSTALL_DATA)
> transform = $(program_transform_name)
> NORMAL_INSTALL = :
> PRE_INSTALL = :
> POST_INSTALL = :
> NORMAL_UNINSTALL = :
> PRE_UNINSTALL = :
> POST_UNINSTALL = :
> build_triplet = x86_64-unknown-linux-gnu
> host_triplet = x86_64-unknown-linux-gnu
> DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
> 	$(top_srcdir)/buildutils/config.mk
> subdir = src/resmom/linux
> ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
> am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
> 	$(top_srcdir)/buildutils/tcl.m4 \
> 	$(top_srcdir)/buildutils/ac_create_generic_config.m4 \
> 	$(top_srcdir)/buildutils/acx_pthread.m4 \
> 	$(top_srcdir)/buildutils/ax_prog_dot.m4 \
> 	$(top_srcdir)/buildutils/ac_c_bigendian_cross.m4 \
> 	$(top_srcdir)/buildutils/t_add_rpath.m4 \
> 	$(top_srcdir)/buildutils/tac_tcltk.m4 \
> 	$(top_srcdir)/configure.ac
> am__configure_deps = $(am__aclocal_m4_deps) $ 
> (CONFIGURE_DEPENDENCIES) \
> 	$(ACLOCAL_M4)
> mkinstalldirs = $(SHELL) $(top_srcdir)/buildutils/mkinstalldirs
> CONFIG_HEADER = $(top_builddir)/src/include/pbs_config.h
> CONFIG_CLEAN_FILES =
> LIBRARIES = $(noinst_LIBRARIES)
> ARFLAGS = cru
> libmommach_a_AR = $(AR) $(ARFLAGS)
> libmommach_a_LIBADD =
> am_libmommach_a_OBJECTS = mom_mach.$(OBJEXT) mom_start.$(OBJEXT) \
> 	pe_input.$(OBJEXT)
> libmommach_a_OBJECTS = $(am_libmommach_a_OBJECTS)
> DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src/include
> depcomp = $(SHELL) $(top_srcdir)/buildutils/depcomp
> am__depfiles_maybe = depfiles
> COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $ 
> (AM_CPPFLAGS) \
> 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
> LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \
> 	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
> 	$(AM_CFLAGS) $(CFLAGS)
> CCLD = $(CC)
> LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $ 
> (CFLAGS) \
> 	$(AM_LDFLAGS) $(LDFLAGS) -o $@
> SOURCES = $(libmommach_a_SOURCES)
> DIST_SOURCES = $(libmommach_a_SOURCES)
> RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
> 	html-recursive info-recursive install-data-recursive \
> 	install-exec-recursive install-info-recursive \
> 	install-recursive installcheck-recursive installdirs-recursive \
> 	pdf-recursive ps-recursive uninstall-info-recursive \
> 	uninstall-recursive
> ETAGS = etags
> CTAGS = ctags
> DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
> ACLOCAL = ${SHELL} /usr/local/src/torque-2.2.1/buildutils/missing -- 
> run aclocal-1.9
> AMDEP_FALSE = #
> AMDEP_TRUE =
> AMTAR = ${SHELL} /usr/local/src/torque-2.2.1/buildutils/missing -- 
> run tar
> AR = ar
> AUTOCONF = ${SHELL} /usr/local/src/torque-2.2.1/buildutils/missing  
> --run autoconf
> AUTOHEADER = ${SHELL} /usr/local/src/torque-2.2.1/buildutils/ 
> missing --run autoheader
> AUTOMAKE = ${SHELL} /usr/local/src/torque-2.2.1/buildutils/missing  
> --run automake-1.9
> AWK = gawk
> BUILDCPA_FALSE =
> BUILDCPA_TRUE = #
> BUILD_L26_CPUSETS_FALSE = #
> BUILD_L26_CPUSETS_TRUE =
> CC = gcc
> CCDEPMODE = depmode=gcc3
> CFLAGS = -g -O2 -D_LARGEFILE64_SOURCE -W -Wall -Wno-unused- 
> parameter -Wno-long-long -pedantic -Werror
> CPP = gcc -E
> CPPFLAGS =
> CXX = g++
> CXXCPP = g++ -E
> CXXDEPMODE = depmode=gcc3
> CXXFLAGS = -g -O2
> CYGPATH = echo
> CYGPATH_W = echo
> DEFS = -DHAVE_CONFIG_H
> DEPDIR = .deps
> DOXYGEN = none
> DRMAA_DOCS_FALSE =
> DRMAA_DOCS_TRUE = #
> ECHO = echo
> ECHO_C =
> ECHO_N = -n
> ECHO_T =
> EGREP = grep -E
> EXEEXT =
> EXTRA_QSTAT_LIBS = $(EXTRA_QSTAT_LIBS)
> F77 = gfortran
> FFLAGS = -g -O2
> GENERIC_CONFIG = pbs-config
> GPERF =
> HAVE_DOT =
> INCLUDE_CLIENTS_FALSE = #
> INCLUDE_CLIENTS_TRUE =
> INCLUDE_DRMAA_FALSE =
> INCLUDE_DRMAA_TRUE = #
> INCLUDE_GUI_FALSE = #
> INCLUDE_GUI_TRUE =
> INCLUDE_MOM_FALSE = #
> INCLUDE_MOM_RCP_FALSE =
> INCLUDE_MOM_RCP_TRUE = #
> INCLUDE_MOM_TRUE =
> INCLUDE_PAM_FALSE =
> INCLUDE_PAM_TRUE = #
> INCLUDE_SERVER_FALSE = #
> INCLUDE_SERVER_TRUE =
> INSTALL_DATA = ${INSTALL} -m 644
> INSTALL_MODULEFILES_FALSE =
> INSTALL_MODULEFILES_TRUE = #
> INSTALL_PROGRAM = ${INSTALL}
> INSTALL_SCRIPT = ${INSTALL}
> INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
> LDFLAGS =
> LEX = flex
> LEXLIB = -lfl
> LEX_OUTPUT_ROOT = lex.yy
> LIBOBJS =
> LIBS =
> LIBTOOL = $(SHELL) $(top_builddir)/libtool
> LN_S = ln -s
> LTLIBOBJS =
> MAINT = #
> MAINTAINER_MODE_FALSE =
> MAINTAINER_MODE_TRUE = #
> MAKE = make
> MAKEINFO = ${SHELL} /usr/local/src/torque-2.2.1/buildutils/missing  
> --run makeinfo
> MODULEFILES_DIR = no
> MOMLIBS =  -lcpuset -lbitmask -lutil
> MY_TCLTK_INCS =    -I/usr/X11R6/include
> MY_TCLTK_LIBS =  -L/usr/lib64 -ltk8.4 -L/usr/X11R6/lib64 -lX11 -L/ 
> usr/lib64 -ltcl8.4 -ldl -lieee -lm
> MY_TCL_INCS =
> MY_TCL_LIBS =  -L/usr/lib64 -ltcl8.4 -ldl -lieee -lm
> OBJEXT = o
> PACKAGE = torque
> PACKAGE_BUGREPORT = torqueusers at supercluster.org
> PACKAGE_NAME = torque
> PACKAGE_STRING = torque 2.2.1
> PACKAGE_TARNAME = torque
> PACKAGE_VERSION = 2.2.1
> PATH_SEPARATOR = :
> PBSPOE =
> PBSPOEO =
> PBS_DEFAULT_FILE = ${PBS_SERVER_HOME}/server_name
> PBS_DEFAULT_SERVER = opticore-head
> PBS_ENVIRON = ${PBS_SERVER_HOME}/pbs_environment
> PBS_MACH = linux
> PBS_SERVER_HOME = /var/spool/torque
> PIC = pic
> PTHREAD_CFLAGS =
> PTHREAD_LIBS =
> RANLIB = ranlib
> RCP_ARGS = -rpB
> RCP_PATH = /usr/bin/scp
> READLINE_LIBS = -lncurses -lreadline
> ROFF = groff
> RSH_PATH = ssh
> SCHD_BASL_FALSE =
> SCHD_BASL_TRUE = #
> SCHD_CODE = fifo
> SCHD_LIBS =
> SCHD_TYPE = cc
> SCHD_TYPE_SUBDIR = scheduler.cc
> SENDMAIL_CMD = /usr/lib/sendmail
> SET_MAKE =
> SHELL = /bin/sh
> STRIP = strip
> TBL = gtbl
> TCLSH_PROG = /usr/bin/tclsh8.4
> TCL_BIN_DIR = /usr/lib64
> TCL_DEFS = -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" - 
> DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT= 
> \"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 - 
> DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 - 
> DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 - 
> DHAVE_UNISTD_H=1 -DHAVE_LIMITS_H=1 -DHAVE_UNISTD_H=1 - 
> DHAVE_SYS_PARAM_H=1 -DPEEK_XCLOSEIM=1 -D_LARGEFILE64_SOURCE=1 - 
> DTCL_WIDE_INT_IS_LONG=1 -DHAVE_GETCWD=1 -DHAVE_OPENDIR=1 - 
> DHAVE_STRSTR=1 -DHAVE_STRTOL=1 -DHAVE_STRTOLL=1 -DHAVE_STRTOULL=1 - 
> DHAVE_TMPNAM=1 -DHAVE_WAITPID=1 -DUSE_TERMIOS=1 -DHAVE_SYS_TIME_H=1  
> -DTIME_WITH_SYS_TIME=1 -DHAVE_STRUCT_TM_TM_ZONE=1 -DHAVE_TM_ZONE=1 - 
> DHAVE_GMTIME_R=1 -DHAVE_LOCALTIME_R=1 -DHAVE_TM_GMTOFF=1 - 
> DHAVE_TIMEZONE_VAR=1 -DHAVE_STRUCT_STAT_ST_BLKSIZE=1 - 
> DHAVE_ST_BLKSIZE=1 -DHAVE_SIGNED_CHAR=1 -DHAVE_LANGINFO=1 - 
> DHAVE_SYS_IOCTL_H=1
> TCL_EXTRA_CFLAGS =
> TCL_INCLUDES =
> TCL_LD_FLAGS =  -Wl,--export-dynamic
> TCL_LIBS = -ldl  -lieee -lm
> TCL_LIB_FILE = libtcl8.4.so
> TCL_LIB_FLAG = -ltcl8.4
> TCL_LIB_SPEC = -L/usr/lib64 -ltcl8.4
> TCL_SHLIB_LD_LIBS = ${LIBS}
> TCL_SRC_DIR = /usr/src/packages/BUILD/tcl8.4.12
> TCL_STUB_LIB_FILE = libtclstub8.4.a
> TCL_STUB_LIB_FLAG = -ltclstub8.4
> TCL_STUB_LIB_SPEC = -L/usr/lib64 -ltclstub8.4
> TCL_VERSION = 8.4
> TK_BIN_DIR = /usr/lib64
> TK_INCLUDES =
> TK_LIBS = -L/usr/X11R6/lib64 -lX11 -ldl  -lpthread -lieee -lm
> TK_LIB_FILE = libtk8.4.so
> TK_LIB_FLAG = -ltk8.4
> TK_LIB_SPEC = -L/usr/lib64 -ltk8.4
> TK_SRC_DIR = /usr/src/packages/BUILD/tk8.4.12
> TK_STUB_LIB_FILE = libtkstub8.4.a
> TK_STUB_LIB_FLAG = -ltkstub8.4
> TK_STUB_LIB_SPEC = -L/usr/lib64 -ltkstub8.4
> TK_VERSION = 8.4
> TK_XINCLUDES = -I/usr/X11R6/include
> USE_TCLQSTAT_FALSE = #
> USE_TCLQSTAT_TRUE =
> USING_RPP_FALSE = #
> USING_RPP_TRUE =
> USING_SYSLOG_FALSE = #
> USING_SYSLOG_TRUE =
> USING_TCL_FALSE = #
> USING_TCL_TRUE =
> USING_TK_FALSE = #
> USING_TK_TRUE =
> VERSION = 2.2.1
> WISH_PROG = /usr/bin/wish8.4
> YACC = bison -y
> ac_ct_AR =
> ac_ct_CC = gcc
> ac_ct_CXX = g++
> ac_ct_F77 = gfortran
> ac_ct_RANLIB = ranlib
> ac_ct_STRIP = strip
> acx_pthread_config =
> am__fastdepCC_FALSE = #
> am__fastdepCC_TRUE =
> am__fastdepCXX_FALSE = #
> am__fastdepCXX_TRUE =
> am__include = include
> am__leading_dot = .
> am__quote =
> am__tar = ${AMTAR} chof - "$$tardir"
> am__untar = ${AMTAR} xf -
> bindir = ${exec_prefix}/bin
> build = x86_64-unknown-linux-gnu
> build_alias =
> build_cpu = x86_64
> build_os = linux-gnu
> build_vendor = unknown
> datadir = ${prefix}/share
> exec_prefix = ${prefix}
> host = x86_64-unknown-linux-gnu
> host_alias =
> host_cpu = x86_64
> host_os = linux-gnu
> host_vendor = unknown
> includedir = ${prefix}/include
> infodir = ${prefix}/info
> install_sh = /usr/local/src/torque-2.2.1/buildutils/install-sh
> libdir = ${exec_prefix}/lib
> libexecdir = ${exec_prefix}/libexec
> localstatedir = ${prefix}/var
> mandir = ${prefix}/man
> mkdir_p = mkdir -p --
> oldincludedir = /usr/include
> pammoddir = disabled
> prefix = /usr/local
> program_prefix =
> program_suffix =
> program_transform_name = s,x,x,
> sbindir = ${exec_prefix}/sbin
> sharedstatedir = ${prefix}/com
> spec_name = torque
> spec_snap =
> spec_version = 2.2.1
> sysconfdir = ${prefix}/etc
> target_alias =
> tclx_LIB_FILE =
> tclx_LIB_SPEC =
> tclx_SRC_DIR =
> tclx_STUB_LIB_FILE =
> tclx_STUB_LIB_PATH =
> tclx_STUB_LIB_SPEC =
> tclx_VERSION =
> tkx_LIB_FILE =
> tkx_LIB_SPEC =
> tkx_SRC_DIR =
> tkx_STUB_LIB_FILE =
> tkx_STUB_LIB_PATH =
> tkx_STUB_LIB_SPEC =
> tkx_VERSION =
> xauth_path = /usr/X11R6/bin/xauth
> AUTOMAKE_OPTIONS = foreign
> PBS_MKDIRS = $(SHELL) $(top_builddir)/buildutils/pbs_mkdirs
> AM_CPPFLAGS = -I$(top_srcdir)/src/include -DPBS_MOM \
> 	-DDEMUX=\"$(DEMUX_PATH)\"
> IFF_PATH = $(sbindir)/$(program_prefix)pbs_iff$(program_suffix)
> DEMUX_PATH = $(sbindir)/$(program_prefix)pbs_demux$(program_suffix)
> XPBS_DIR = $(libdir)/xpbs
> XPBSMON_DIR = $(libdir)/xpbsmon
> SUBMIT_FILTER_PATH = $(libexecdir)/qsub_filter
> csetsubdir = cpuset
> csetlib = cpuset/libmomcpuset.a
> DIST_SUBDIRS = cpuset
> SUBDIRS = $(csetsubdir)
> LDADD = $(csetlib)
> noinst_LIBRARIES = libmommach.a
> libmommach_a_SOURCES = mom_mach.c mom_mach.h mom_start.c pe_input.c
> all: all-recursive
>
> .SUFFIXES:
> .SUFFIXES: .c .lo .o .obj
> $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/ 
> buildutils/config.mk $(am__configure_deps)
> 	@for dep in $?; do \
> 	  case '$(am__configure_deps)' in \
> 	    *$$dep*) \
> 	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
> 		&& exit 0; \
> 	      exit 1;; \
> 	  esac; \
> 	done; \
> 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  src/resmom/linux/ 
> Makefile'; \
> 	cd $(top_srcdir) && \
> 	  $(AUTOMAKE) --foreign  src/resmom/linux/Makefile
> .PRECIOUS: Makefile
> Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
> 	@case '$?' in \
> 	  *config.status*) \
> 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
> 	  *) \
> 	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $ 
> (subdir)/$@ $(am__depfiles_maybe)'; \
> 	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $ 
> (am__depfiles_maybe);; \
> 	esac;
>
> $(top_builddir)/config.status: $(top_srcdir)/configure $ 
> (CONFIG_STATUS_DEPENDENCIES)
> 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
>
> $(top_srcdir)/configure: # $(am__configure_deps)
> 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
> $(ACLOCAL_M4): # $(am__aclocal_m4_deps)
> 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
>
> clean-noinstLIBRARIES:
> 	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
> libmommach.a: $(libmommach_a_OBJECTS) $(libmommach_a_DEPENDENCIES)
> 	-rm -f libmommach.a
> 	$(libmommach_a_AR) libmommach.a $(libmommach_a_OBJECTS) $ 
> (libmommach_a_LIBADD)
> 	$(RANLIB) libmommach.a
>
> mostlyclean-compile:
> 	-rm -f *.$(OBJEXT)
>
> distclean-compile:
> 	-rm -f *.tab.c
>
> include ./$(DEPDIR)/mom_mach.Po
> include ./$(DEPDIR)/mom_start.Po
> include ./$(DEPDIR)/pe_input.Po
>
> .c.o:
> 	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
> 	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$ 
> (DEPDIR)/$*.Tpo"; exit 1; fi
> #	source='$<' object='$@' libtool=no \
> #	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
> #	$(COMPILE) -c $<
>
> .c.obj:
> 	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$ 
> (CYGPATH_W) '$<'`; \
> 	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$ 
> (DEPDIR)/$*.Tpo"; exit 1; fi
> #	source='$<' object='$@' libtool=no \
> #	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
> #	$(COMPILE) -c `$(CYGPATH_W) '$<'`
>
> .c.lo:
> 	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
> 	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$ 
> (DEPDIR)/$*.Tpo"; exit 1; fi
> #	source='$<' object='$@' libtool=yes \
> #	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
> #	$(LTCOMPILE) -c -o $@ $<
>
> mostlyclean-libtool:
> 	-rm -f *.lo
>
> clean-libtool:
> 	-rm -rf .libs _libs
>
> distclean-libtool:
> 	-rm -f libtool
> uninstall-info-am:
>
> # This directory's subdirectories are mostly independent; you can cd
> # into them and run `make' without going through this Makefile.
> # To change the values of `make' variables: instead of editing  
> Makefiles,
> # (1) if the variable is set in `config.status', edit `config.status'
> #     (which will cause the Makefiles to be regenerated when you  
> run `make');
> # (2) otherwise, pass the desired values on the `make' command line.
> $(RECURSIVE_TARGETS):
> 	@set fnord $$MAKEFLAGS; amf=$$2; \
> 	dot_seen=no; \
> 	target=`echo $@ | sed s/-recursive//`; \
> 	list='$(SUBDIRS)'; for subdir in $$list; do \
> 	  echo "Making $$target in $$subdir"; \
> 	  if test "$$subdir" = "."; then \
> 	    dot_seen=yes; \
> 	    local_target="$$target-am"; \
> 	  else \
> 	    local_target="$$target"; \
> 	  fi; \
> 	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
> 	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;;  
> esac; \
> 	done; \
> 	if test "$$dot_seen" = "no"; then \
> 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
> 	fi; test -z "$$fail"
>
> mostlyclean-recursive clean-recursive distclean-recursive \
> maintainer-clean-recursive:
> 	@set fnord $$MAKEFLAGS; amf=$$2; \
> 	dot_seen=no; \
> 	case "$@" in \
> 	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
> 	  *) list='$(SUBDIRS)' ;; \
> 	esac; \
> 	rev=''; for subdir in $$list; do \
> 	  if test "$$subdir" = "."; then :; else \
> 	    rev="$$subdir $$rev"; \
> 	  fi; \
> 	done; \
> 	rev="$$rev ."; \
> 	target=`echo $@ | sed s/-recursive//`; \
> 	for subdir in $$rev; do \
> 	  echo "Making $$target in $$subdir"; \
> 	  if test "$$subdir" = "."; then \
> 	    local_target="$$target-am"; \
> 	  else \
> 	    local_target="$$target"; \
> 	  fi; \
> 	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
> 	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;;  
> esac; \
> 	done && test -z "$$fail"
> tags-recursive:
> 	list='$(SUBDIRS)'; for subdir in $$list; do \
> 	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)  
> tags); \
> 	done
> ctags-recursive:
> 	list='$(SUBDIRS)'; for subdir in $$list; do \
> 	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)  
> ctags); \
> 	done
>
> ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
> 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
> 	unique=`for i in $$list; do \
> 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
> 	  done | \
> 	  $(AWK) '    { files[$$0] = 1; } \
> 	       END { for (i in files) print i; }'`; \
> 	mkid -fID $$unique
> tags: TAGS
>
> TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
> 		$(TAGS_FILES) $(LISP)
> 	tags=; \
> 	here=`pwd`; \
> 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
> 	  include_option=--etags-include; \
> 	  empty_fix=.; \
> 	else \
> 	  include_option=--include; \
> 	  empty_fix=; \
> 	fi; \
> 	list='$(SUBDIRS)'; for subdir in $$list; do \
> 	  if test "$$subdir" = .; then :; else \
> 	    test ! -f $$subdir/TAGS || \
> 	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
> 	  fi; \
> 	done; \
> 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
> 	unique=`for i in $$list; do \
> 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
> 	  done | \
> 	  $(AWK) '    { files[$$0] = 1; } \
> 	       END { for (i in files) print i; }'`; \
> 	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
> 	  test -n "$$unique" || unique=$$empty_fix; \
> 	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
> 	    $$tags $$unique; \
> 	fi
> ctags: CTAGS
> CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
> 		$(TAGS_FILES) $(LISP)
> 	tags=; \
> 	here=`pwd`; \
> 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
> 	unique=`for i in $$list; do \
> 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
> 	  done | \
> 	  $(AWK) '    { files[$$0] = 1; } \
> 	       END { for (i in files) print i; }'`; \
> 	test -z "$(CTAGS_ARGS)$$tags$$unique" \
> 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
> 	     $$tags $$unique
>
> GTAGS:
> 	here=`$(am__cd) $(top_builddir) && pwd` \
> 	  && cd $(top_srcdir) \
> 	  && gtags -i $(GTAGS_ARGS) $$here
>
> distclean-tags:
> 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
>
> distdir: $(DISTFILES)
> 	$(mkdir_p) $(distdir)/../../../buildutils
> 	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
> 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
> 	list='$(DISTFILES)'; for file in $$list; do \
> 	  case $$file in \
> 	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
> 	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$ 
> $topsrcdirstrip/|$(top_builddir)/|"`;; \
> 	  esac; \
> 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir);  
> fi; \
> 	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
> 	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
> 	    dir="/$$dir"; \
> 	    $(mkdir_p) "$(distdir)$$dir"; \
> 	  else \
> 	    dir=''; \
> 	  fi; \
> 	  if test -d $$d/$$file; then \
> 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
> 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
> 	    fi; \
> 	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
> 	  else \
> 	    test -f $(distdir)/$$file \
> 	    || cp -p $$d/$$file $(distdir)/$$file \
> 	    || exit 1; \
> 	  fi; \
> 	done
> 	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
> 	  if test "$$subdir" = .; then :; else \
> 	    test -d "$(distdir)/$$subdir" \
> 	    || $(mkdir_p) "$(distdir)/$$subdir" \
> 	    || exit 1; \
> 	    distdir=`$(am__cd) $(distdir) && pwd`; \
> 	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
> 	    (cd $$subdir && \
> 	      $(MAKE) $(AM_MAKEFLAGS) \
> 	        top_distdir="$$top_distdir" \
> 	        distdir="$$distdir/$$subdir" \
> 	        distdir) \
> 	      || exit 1; \
> 	  fi; \
> 	done
> check-am: all-am
> check: check-recursive
> all-am: Makefile $(LIBRARIES)
> installdirs: installdirs-recursive
> installdirs-am:
> install: install-recursive
> install-exec: install-exec-recursive
> install-data: install-data-recursive
> uninstall: uninstall-recursive
>
> install-am: all-am
> 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
>
> installcheck: installcheck-recursive
> install-strip:
> 	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
> 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)"  
> INSTALL_STRIP_FLAG=-s \
> 	  `test -z '$(STRIP)' || \
> 	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
> mostlyclean-generic:
>
> clean-generic:
>
> distclean-generic:
> 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
>
> maintainer-clean-generic:
> 	@echo "This command is intended for maintainers to use"
> 	@echo "it deletes files that may require special tools to rebuild."
> clean: clean-recursive
>
> clean-am: clean-generic clean-libtool clean-noinstLIBRARIES \
> 	mostlyclean-am
>
> distclean: distclean-recursive
> 	-rm -rf ./$(DEPDIR)
> 	-rm -f Makefile
> distclean-am: clean-am distclean-compile distclean-generic \
> 	distclean-libtool distclean-tags
>
> dvi: dvi-recursive
>
> dvi-am:
>
> html: html-recursive
>
> info: info-recursive
>
> info-am:
>
> install-data-am:
>
> install-exec-am:
>
> install-info: install-info-recursive
>
> install-man:
>
> installcheck-am:
>
> maintainer-clean: maintainer-clean-recursive
> 	-rm -rf ./$(DEPDIR)
> 	-rm -f Makefile
> maintainer-clean-am: distclean-am maintainer-clean-generic
>
> mostlyclean: mostlyclean-recursive
>
> mostlyclean-am: mostlyclean-compile mostlyclean-generic \
> 	mostlyclean-libtool
>
> pdf: pdf-recursive
>
> pdf-am:
>
> ps: ps-recursive
>
> ps-am:
>
> uninstall-am: uninstall-info-am
>
> uninstall-info: uninstall-info-recursive
>
> .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
> 	clean clean-generic clean-libtool clean-noinstLIBRARIES \
> 	clean-recursive ctags ctags-recursive distclean \
> 	distclean-compile distclean-generic distclean-libtool \
> 	distclean-recursive distclean-tags distdir dvi dvi-am html \
> 	html-am info info-am install install-am install-data \
> 	install-data-am install-exec install-exec-am install-info \
> 	install-info-am install-man install-strip installcheck \
> 	installcheck-am installdirs installdirs-am maintainer-clean \
> 	maintainer-clean-generic maintainer-clean-recursive \
> 	mostlyclean mostlyclean-compile mostlyclean-generic \
> 	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
> 	tags tags-recursive uninstall uninstall-am uninstall-info-am
>
> # Tell versions [3.59,3.63) of GNU make to not export all variables.
> # Otherwise a system limit (for SysV at least) may be exceeded.
> .NOEXPORT:
> _______________________________________________
> torqueusers mailing list
> torqueusers at supercluster.org
> http://www.supercluster.org/mailman/listinfo/torqueusers



More information about the torqueusers mailing list