[torqueusers] help! torque-2.2.1 will not build

Steven DuChene sduchene at sgi.com
Sat Nov 3 21:15:00 MDT 2007


Garrick Staples wrote:
> On Sat, Nov 03, 2007 at 06:14:39PM -0700, Garrick Staples alleged:
>   
>> Looks like something wrong with the Makefile.  Can you change:
>>    SUBDIRS = $(cpuset)
>> to:
>>    SUBDIRS = $(cpusetdir)
>> in src/resmom/linux/Makefile.in and run configure again?
>>     
>
>
> Err, that should be:
>    SUBDIRS = $(csetsubdir)
>   
> ------------------------------------------------------------------------
>
>   
See attached Makefile that was generated by the configure run

-------------- next part --------------
# Makefile.in generated by automake 1.9.2 from Makefile.am.
# src/resmom/linux/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



SOURCES = $(libmommach_a_SOURCES)

srcdir = .
top_srcdir = ../../..

pkgdatadir = $(datadir)/torque
pkglibdir = $(libdir)/torque
pkgincludedir = $(includedir)/torque
top_builddir = ../../..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(top_srcdir)/buildutils/config.mk
subdir = src/resmom/linux
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/buildutils/tcl.m4 \
	$(top_srcdir)/buildutils/ac_create_generic_config.m4 \
	$(top_srcdir)/buildutils/acx_pthread.m4 \
	$(top_srcdir)/buildutils/ax_prog_dot.m4 \
	$(top_srcdir)/buildutils/ac_c_bigendian_cross.m4 \
	$(top_srcdir)/buildutils/t_add_rpath.m4 \
	$(top_srcdir)/buildutils/tac_tcltk.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/buildutils/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/src/include/pbs_config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
ARFLAGS = cru
libmommach_a_AR = $(AR) $(ARFLAGS)
libmommach_a_LIBADD =
am_libmommach_a_OBJECTS = mom_mach.$(OBJEXT) mom_start.$(OBJEXT) \
	pe_input.$(OBJEXT)
libmommach_a_OBJECTS = $(am_libmommach_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src/include
depcomp = $(SHELL) $(top_srcdir)/buildutils/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libmommach_a_SOURCES)
DIST_SOURCES = $(libmommach_a_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /usr/local/src/torque-2.2.1/buildutils/missing --run aclocal-1.9
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /usr/local/src/torque-2.2.1/buildutils/missing --run tar
AR = ar
AUTOCONF = ${SHELL} /usr/local/src/torque-2.2.1/buildutils/missing --run autoconf
AUTOHEADER = ${SHELL} /usr/local/src/torque-2.2.1/buildutils/missing --run autoheader
AUTOMAKE = ${SHELL} /usr/local/src/torque-2.2.1/buildutils/missing --run automake-1.9
AWK = gawk
BUILDCPA_FALSE = 
BUILDCPA_TRUE = #
BUILD_L26_CPUSETS_FALSE = #
BUILD_L26_CPUSETS_TRUE = 
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -D_LARGEFILE64_SOURCE -W -Wall -Wno-unused-parameter -Wno-long-long -pedantic -Werror
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH = echo
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DOXYGEN = none
DRMAA_DOCS_FALSE = 
DRMAA_DOCS_TRUE = #
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
EXEEXT = 
EXTRA_QSTAT_LIBS = $(EXTRA_QSTAT_LIBS)
F77 = gfortran
FFLAGS = -g -O2
GENERIC_CONFIG = pbs-config
GPERF = 
HAVE_DOT = 
INCLUDE_CLIENTS_FALSE = #
INCLUDE_CLIENTS_TRUE = 
INCLUDE_DRMAA_FALSE = 
INCLUDE_DRMAA_TRUE = #
INCLUDE_GUI_FALSE = #
INCLUDE_GUI_TRUE = 
INCLUDE_MOM_FALSE = #
INCLUDE_MOM_RCP_FALSE = 
INCLUDE_MOM_RCP_TRUE = #
INCLUDE_MOM_TRUE = 
INCLUDE_PAM_FALSE = 
INCLUDE_PAM_TRUE = #
INCLUDE_SERVER_FALSE = #
INCLUDE_SERVER_TRUE = 
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_MODULEFILES_FALSE = 
INSTALL_MODULEFILES_TRUE = #
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LDFLAGS = 
LEX = flex
LEXLIB = -lfl
LEX_OUTPUT_ROOT = lex.yy
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAINTAINER_MODE_FALSE = 
MAINTAINER_MODE_TRUE = #
MAKE = make
MAKEINFO = ${SHELL} /usr/local/src/torque-2.2.1/buildutils/missing --run makeinfo
MODULEFILES_DIR = no
MOMLIBS =  -lcpuset -lbitmask -lutil
MY_TCLTK_INCS =    -I/usr/X11R6/include
MY_TCLTK_LIBS =  -L/usr/lib64 -ltk8.4 -L/usr/X11R6/lib64 -lX11 -L/usr/lib64 -ltcl8.4 -ldl -lieee -lm
MY_TCL_INCS =  
MY_TCL_LIBS =  -L/usr/lib64 -ltcl8.4 -ldl -lieee -lm
OBJEXT = o
PACKAGE = torque
PACKAGE_BUGREPORT = torqueusers at supercluster.org
PACKAGE_NAME = torque
PACKAGE_STRING = torque 2.2.1
PACKAGE_TARNAME = torque
PACKAGE_VERSION = 2.2.1
PATH_SEPARATOR = :
PBSPOE = 
PBSPOEO = 
PBS_DEFAULT_FILE = ${PBS_SERVER_HOME}/server_name
PBS_DEFAULT_SERVER = opticore-head
PBS_ENVIRON = ${PBS_SERVER_HOME}/pbs_environment
PBS_MACH = linux
PBS_SERVER_HOME = /var/spool/torque
PIC = pic
PTHREAD_CFLAGS = 
PTHREAD_LIBS = 
RANLIB = ranlib
RCP_ARGS = -rpB
RCP_PATH = /usr/bin/scp
READLINE_LIBS = -lncurses -lreadline
ROFF = groff
RSH_PATH = ssh
SCHD_BASL_FALSE = 
SCHD_BASL_TRUE = #
SCHD_CODE = fifo
SCHD_LIBS = 
SCHD_TYPE = cc
SCHD_TYPE_SUBDIR = scheduler.cc
SENDMAIL_CMD = /usr/lib/sendmail
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
TBL = gtbl
TCLSH_PROG = /usr/bin/tclsh8.4
TCL_BIN_DIR = /usr/lib64
TCL_DEFS = -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_LIMITS_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DPEEK_XCLOSEIM=1 -D_LARGEFILE64_SOURCE=1 -DTCL_WIDE_INT_IS_LONG=1 -DHAVE_GETCWD=1 -DHAVE_OPENDIR=1 -DHAVE_STRSTR=1 -DHAVE_STRTOL=1 -DHAVE_STRTOLL=1 -DHAVE_STRTOULL=1 -DHAVE_TMPNAM=1 -DHAVE_WAITPID=1 -DUSE_TERMIOS=1 -DHAVE_SYS_TIME_H=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_STRUCT_TM_TM_ZONE=1 -DHAVE_TM_ZONE=1 -DHAVE_GMTIME_R=1 -DHAVE_LOCALTIME_R=1 -DHAVE_TM_GMTOFF=1 -DHAVE_TIMEZONE_VAR=1 -DHAVE_STRUCT_STAT_ST_BLKSIZE=1 -DHAVE_ST_BLKSIZE=1 -DHAVE_SIGNED_CHAR=1 -DHAVE_LANGINFO=1 -DHAVE_SYS_IOCTL_H=1 
TCL_EXTRA_CFLAGS = 
TCL_INCLUDES = 
TCL_LD_FLAGS =  -Wl,--export-dynamic
TCL_LIBS = -ldl  -lieee -lm
TCL_LIB_FILE = libtcl8.4.so
TCL_LIB_FLAG = -ltcl8.4
TCL_LIB_SPEC = -L/usr/lib64 -ltcl8.4
TCL_SHLIB_LD_LIBS = ${LIBS}
TCL_SRC_DIR = /usr/src/packages/BUILD/tcl8.4.12
TCL_STUB_LIB_FILE = libtclstub8.4.a
TCL_STUB_LIB_FLAG = -ltclstub8.4
TCL_STUB_LIB_SPEC = -L/usr/lib64 -ltclstub8.4
TCL_VERSION = 8.4
TK_BIN_DIR = /usr/lib64
TK_INCLUDES = 
TK_LIBS = -L/usr/X11R6/lib64 -lX11 -ldl  -lpthread -lieee -lm
TK_LIB_FILE = libtk8.4.so
TK_LIB_FLAG = -ltk8.4
TK_LIB_SPEC = -L/usr/lib64 -ltk8.4
TK_SRC_DIR = /usr/src/packages/BUILD/tk8.4.12
TK_STUB_LIB_FILE = libtkstub8.4.a
TK_STUB_LIB_FLAG = -ltkstub8.4
TK_STUB_LIB_SPEC = -L/usr/lib64 -ltkstub8.4
TK_VERSION = 8.4
TK_XINCLUDES = -I/usr/X11R6/include
USE_TCLQSTAT_FALSE = #
USE_TCLQSTAT_TRUE = 
USING_RPP_FALSE = #
USING_RPP_TRUE = 
USING_SYSLOG_FALSE = #
USING_SYSLOG_TRUE = 
USING_TCL_FALSE = #
USING_TCL_TRUE = 
USING_TK_FALSE = #
USING_TK_TRUE = 
VERSION = 2.2.1
WISH_PROG = /usr/bin/wish8.4
YACC = bison -y
ac_ct_AR = 
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 = gfortran
ac_ct_RANLIB = ranlib
ac_ct_STRIP = strip
acx_pthread_config = 
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__fastdepCXX_FALSE = #
am__fastdepCXX_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
datadir = ${prefix}/share
exec_prefix = ${prefix}
host = x86_64-unknown-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
includedir = ${prefix}/include
infodir = ${prefix}/info
install_sh = /usr/local/src/torque-2.2.1/buildutils/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/man
mkdir_p = mkdir -p --
oldincludedir = /usr/include
pammoddir = disabled
prefix = /usr/local
program_prefix = 
program_suffix = 
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
spec_name = torque
spec_snap = 
spec_version = 2.2.1
sysconfdir = ${prefix}/etc
target_alias = 
tclx_LIB_FILE = 
tclx_LIB_SPEC = 
tclx_SRC_DIR = 
tclx_STUB_LIB_FILE = 
tclx_STUB_LIB_PATH = 
tclx_STUB_LIB_SPEC = 
tclx_VERSION = 
tkx_LIB_FILE = 
tkx_LIB_SPEC = 
tkx_SRC_DIR = 
tkx_STUB_LIB_FILE = 
tkx_STUB_LIB_PATH = 
tkx_STUB_LIB_SPEC = 
tkx_VERSION = 
xauth_path = /usr/X11R6/bin/xauth
AUTOMAKE_OPTIONS = foreign
PBS_MKDIRS = $(SHELL) $(top_builddir)/buildutils/pbs_mkdirs
AM_CPPFLAGS = -I$(top_srcdir)/src/include -DPBS_MOM \
	-DDEMUX=\"$(DEMUX_PATH)\"
IFF_PATH = $(sbindir)/$(program_prefix)pbs_iff$(program_suffix)
DEMUX_PATH = $(sbindir)/$(program_prefix)pbs_demux$(program_suffix)
XPBS_DIR = $(libdir)/xpbs
XPBSMON_DIR = $(libdir)/xpbsmon
SUBMIT_FILTER_PATH = $(libexecdir)/qsub_filter
csetsubdir = cpuset
csetlib = cpuset/libmomcpuset.a
DIST_SUBDIRS = cpuset
SUBDIRS = $(csetsubdir)
LDADD = $(csetlib)
noinst_LIBRARIES = libmommach.a
libmommach_a_SOURCES = mom_mach.c mom_mach.h mom_start.c pe_input.c
all: all-recursive

.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/buildutils/config.mk $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  src/resmom/linux/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  src/resmom/linux/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

clean-noinstLIBRARIES:
	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
libmommach.a: $(libmommach_a_OBJECTS) $(libmommach_a_DEPENDENCIES) 
	-rm -f libmommach.a
	$(libmommach_a_AR) libmommach.a $(libmommach_a_OBJECTS) $(libmommach_a_LIBADD)
	$(RANLIB) libmommach.a

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

include ./$(DEPDIR)/mom_mach.Po
include ./$(DEPDIR)/mom_start.Po
include ./$(DEPDIR)/pe_input.Po

.c.o:
	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c $<

.c.obj:
	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
#	source='$<' object='$@' libtool=yes \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(mkdir_p) $(distdir)/../../../buildutils
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(LIBRARIES)
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-noinstLIBRARIES \
	mostlyclean-am

distclean: distclean-recursive
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am:

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
	clean clean-generic clean-libtool clean-noinstLIBRARIES \
	clean-recursive ctags ctags-recursive distclean \
	distclean-compile distclean-generic distclean-libtool \
	distclean-recursive distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-exec install-exec-am install-info \
	install-info-am install-man install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic maintainer-clean-recursive \
	mostlyclean mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am uninstall-info-am

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:


More information about the torqueusers mailing list