[torqueusers] torque-2.1.0p0 link problems on IRIX 6.5

[kamil Marcinkowski]

Hello Robert Payne

I have the same problem compiling the latest
snapshot of torque 2.1.1 as well as torque 2.1.0
on SGI  Origin 350 running IRIX 6.5 6.5.28f.

Can you send me information on your manual fix?

Thanks,

Kamil


Kamil Marcinkowski                   Westgrid System Administrator
kamil at ualberta.ca                     University of Alberta site
  Tel.780 492-0354                     Research Computing Support
Fax.780 492-1729                     Academic ICT
Edmonton, Alberta, CANADA    University of Alberta


"This communication is intended for the use of the recipient to which  
it is
addressed, and may contain confidential, personal, and/or privileged
information.  Please contact us immediately if you are not the intended
recipient of this communication.  If you are not the intended  
recipient of
this communication, do not copy, distribute, or take action on it. Any
communication received in error, or subsequent reply, should be  
deleted or
destroyed."



On 14-Jun-06, at 7:33 AM, Robert Payne[Contr] wrote:

> I don't usually work on IRIX systems but I was asked to update
> some IRIX servers using PBS and I found that torque-2.1.0p0
> would not build properly  however torque-2.0.0p0 seemed to
> build OK.  In order to get torque-2.1.0p0 to build
> I had to manually adjust the link list in the Makefiles.  Anyone  
> else had torque-2.1.0p0 problems on IRIX 6.5 systems?
>
>
> Robert R. Payne [SAIC], Systems Software Specialist
> SAIC-Frederick P.O. Box B Bldg 430
> Frederick, MD 21702  email: payner at ncifcrf.gov phone: 301-846-5496  
> fax: 301-846-5762 _______________________________________________
> torqueusers mailing list
> torqueusers at supercluster.org
> http://www.supercluster.org/mailman/listinfo/torqueusers
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.supercluster.org/pipermail/torqueusers/attachments/20060614/d8d8d35c/attachment.html