[Mauiusers] Fairshare priorities

[Simon Hammond]

I had this problem and I'm sure its not the best answer but I put a
fairshare target in for the users so something like USERCFG[DEFAULT]
FSTARGET=100

And... our fairshare works now.

Hope thats helpful, I'm sure there are much better solutions but this
might help you get it working.


S.


On 22 April 2010 14:47, Philip Peartree
<p.peartree at postgrad.manchester.ac.uk> wrote:
> I have set up a fairshare system with the target user percentage as 12.5.
> Running diagnose -p on the idle jobs in the queue gives this output:
>
> diagnosing job priority information (partition: ALL)
>
> Job                    PRIORITY*     FS( User)  Serv(QTime)
>              Weights   --------     200(   25)   150(   25)
>
> 35509                    321750     0.0(  0.0) 100.0(32175)
> 35510                    318188     0.0(  0.0) 100.0(31818)
>
> Percent Contribution   --------     0.0(  0.0) 100.0(100.0)
>
> * indicates system prio set on job
>
> I know it's fairly uncomplex, but I don't understand why the FS column and
> User column show 0.0 for both jobs, the current Fairshare percentage of the
> user is 12.9%. I'm probably misunderstanding something, but if anyone could
> point this out to me I would be grateful.
>
> Philip Peartree
> University of Manchester
>
> _______________________________________________
> mauiusers mailing list
> mauiusers at supercluster.org
> http://www.supercluster.org/mailman/listinfo/mauiusers
>
>