[Mauiusers] Re: [torqueusers] Job Priorities and maui with torque
jeff.blasius at gmail.com
Mon Oct 17 09:59:20 MDT 2005
Actually it seems this group would be happier going with the generic
pbs scheduler. We moved away from it because it would only run jobs on
one compute node. Does anyone have any experience using a recent
version of the scheduler? Did they find similar problems?
On 10/14/05, Dave Jackson <jacksond at clusterresources.com> wrote:
> Sorry for the delay in responding.
There was no delay. I just couldn't get my email to post. Probably
because of issues on my side.
Due to the inherent unfairness of
> user specified job priorities, Maui was designed to disallow them with a
> leaning towards using 'qualities of service' (or QOS). If you would
> like to enable user priority directly and not use the QOS's other
> features, you can do something like the following:
> # maui.cfg
> # create 'priority' QOS's
> QOSCFG[q1] PRIORITY=100
> QOSCFG[q2] PRIORITY=1000
> QOSCFG[q3] PRIORITY=10000
> QOSCFG[q4] PRIORITY=100000
> # allow all users to user all 'priority' QOS's
> USERCFG[DEFAULT] QLIST=q1,q2,q3,q4
> # allow QOS priorities to adjust job priority
> QOSWEIGHT 1
> CREDWEIGHT 1
> If using recent TORQUE releases, users (or the job filter) can then
> submit jobs using:
> > qsub -l nodes=1,qos=q1 text.cmd
> If using Moab, the above is possible and you can also natively use
> TORQUE job priorities by setting the USERPRIORITYWEIGHT parameter.
> Please let us know if this helps.
> On Fri, 2005-10-14 at 10:13 -0400, Jeff Blasius wrote:
> > Hello Everyone,
> > I tried to send this to the maui list, but it didn't seem to get
> > through. Does anybody have any experience getting maui to respect
> > torque's priorities (set with the -p flag)?
> > We are moving a group away from the torque scheduler to maui, but it
> > seems the more advanced priority scheme is causing them trouble.
> > What they normally do is submit jobs through a web interface that
> > lowers their priority throughout the day using "qsub -p". At the end
> > of the day the counter resets and the priority goes back to the
> > starting point. This enables power users to login and specify a higher
> > priority to make sure their job runs right away.
> > So, can I tweak maui in some way to respect the torque priorities? How
> > can I configure maui to respect hard priorities? That is, jobs with a
> > priority 2 will always run before priority 1.
> > Thank You,
> > jeff
> > --
> > Jeff Blasius / jeff.blasius at yale.edu
> > Phone: (203)432-9940 51 Prospect Rm. 011
> > High Performance Computing (HPC)
> > UNIX Systems Administrator, WorkStation Support (WSS)
> > Yale University Information Technology Services (ITS)
> > _______________________________________________
> > torqueusers mailing list
> > torqueusers at supercluster.org
> > http://www.supercluster.org/mailman/listinfo/torqueusers
Jeff Blasius / jeff.blasius at yale.edu
Phone: (203)432-9940 51 Prospect Rm. 011
High Performance Computing (HPC)
UNIX Systems Administrator, WorkStation Support (WSS)
Yale University Information Technology Services (ITS)
More information about the mauiusers