[gold-users] ICST-gold

Scott Jackson scottmo at adaptivecomputing.com
Wed Sep 28 12:00:14 MDT 2011


Yes, make sure you run the createdb and psql commands as the gold user (or the userid that goldd will run under).


----- Original Message -----
> From: "Steve Crusan" <scrusan at ur.rochester.edu>
> To: "Gold Users Mailing List" <gold-users at supercluster.org>
> Sent: Wednesday, September 28, 2011 11:10:16 AM
> Subject: Re: [gold-users] ICST-gold
> 
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> It would be probably be easier for the list to read if you posted the
> last few error messages than posting the whole setup steps each
> time...
> 
> That being said, is the gold user the owner of the postgresql
> database, and also allowed to connect to it?
> 
> If you connect to the postgres db, check the database ownership:
> postgres=> \l
>         List of databases
>    Name    |  Owner   | Encoding
> - -----------+----------+----------
>  gold      | gold     | UTF8
> 
> 
> Also, make sure you have a line in your
> postgres_root/data/pg_hba.conf that is something like this:
> 
> # IPv4 local connections:
> host    gold        gold        127.0.0.1/32          md5
> 
> You should be able to connect from the commandline via:
> psql -U gold -d gold -h localhost -W
> Enter passwd:
> 
> That password you entered needs to match the password in your
> $gold_root/etc/goldd.conf
> database.password = mypass
> 
> After you make changes to your postgres pg_hba.conf file, you need to
> restart postgres, and also the gold service.
> 
> 
> On Sep 28, 2011, at 12:30 PM, truongco nguyen wrote:
> 
> > Thank you very much for your help, but when i finish the make deps
> > step. The
> > new bug turn out.  Any helps please?
> > 
> > Thanks you in advance!
> > 
> > Following is updated step.
> > 
> > step 1: create user
> > adduser gold
> > adduser postgress
> > step2:
> > [root at cluster source]# cp gold-2.2.0.0.tar.gz /home/gold/
> > [root at cluster source]# chown gold:gold /home/gold/
> > step3:
> > su gold
> > [gold at cluster ~]$ tar -zxvf gold-2.2.0.0.tar.gz
> > [gold at cluster ~]$ cd gold-2.2.0.0
> > step4:
> > [root at cluster source]# tar -zxvf postgresql-8.3.3.tar.gz
> > [root at cluster source]# cd postgresql-8.3.3
> > step5:
> > [root at cluster postgresql-8.3.3]# ./configure
> > report:
> > configure: creating ./config.status
> > config.status: creating GNUmakefile
> > config.status: creating src/Makefile.global
> > config.status: creating src/include/pg_config.h
> > config.status: creating src/interfaces/ecpg/include/ecpg_config.h
> > config.status: linking ./src/backend/port/tas/dummy.s to
> > src/backend/port/tas.s
> > config.status: linking ./src/backend/port/dynloader/linux.c to
> > src/backend/port/dynloader.c
> > config.status: linking ./src/backend/port/sysv_sema.c to
> > src/backend/port/pg_sema.c
> > config.status: linking ./src/backend/port/sysv_shmem.c to
> > src/backend/port/pg_shmem.c
> > config.status: linking ./src/backend/port/dynloader/linux.h to
> > src/include/dynloader.h
> > config.status: linking ./src/include/port/linux.h to
> > src/include/pg_config_os.h
> > config.status: linking ./src/makefiles/Makefile.linux to
> > src/Makefile.port
> > 
> > step6:
> > 
> > [root at cluster postgresql-8.3.3]# make
> > step7:
> > 
> > [root at cluster postgresql-8.3.3]# make install
> > [root at cluster postgresql-8.3.3]# mkdir /usr/local/pgsql/data
> > [root at cluster postgresql-8.3.3]# chown postgress
> > /usr/local/pgsql/data
> > [root at cluster postgresql-8.3.3]# touch /var/log/pgsql
> > [root at cluster postgresql-8.3.3]# chown postgress /var/log/pgsql
> > 
> > [root at cluster postgresql-8.3.3]# rpm -qa | grep perl
> > perl-5.8.8-32.el5_5.2
> > perl-suidperl-5.8.8-32.el5_5.2
> > 
> > [root at cluster postgresql-8.3.3]# rpm -qa |grep libxml
> > foundation-libxml2-2.6.23-0
> > libxml2-2.6.26-2.1.2.8.el5_5.1
> > libxml2-2.6.26-2.1.2.8.el5_5.1
> > libxml2-devel-2.6.26-2.1.2.8.el5_5.1
> > libxml2-python-2.6.26-2.1.2.8.el5_5.1
> > 
> > [root at cluster postgresql-8.3.3]# rpm -qa |grep readline
> > readline-5.1-3.el5
> > readline-5.1-3.el5
> > foundation-readline-5.1-0
> > readline-devel-5.1-3.el5
> > 
> > [root at cluster postgresql-8.3.3]# rpm -qa |grep httpd
> > httpd-devel-2.2.3-43.el5.centos.3
> > httpd-devel-2.2.3-43.el5.centos.3
> > httpd-2.2.3-43.el5.centos.3
> > 
> > [root at cluster postgresql-8.3.3]# rpm -qa |grep openssl
> > openssl-0.9.8e-12.el5_4.6
> > openssl-0.9.8e-12.el5_4.6
> > openssl-devel-0.9.8e-12.el5_4.6
> > openssl-devel-0.9.8e-12.el5_4.6
> > [root at cluster postgresql-8.3.3]# rpm -qa |grep mod_ssl
> > mod_ssl-2.2.3-43.el5.centos.3
> > 
> > [gold at cluster gold-2.2.0.0]$ ./configure --with-db=Pg
> > --with-readline
> > --with-user=gold --with-perl-libs=local --with-gold-libs=local
> > --with-cgi-bin=/var/www/cgi-bin/gold
> > [gold at cluster gold-2.2.0.0]$ make
> > [gold at cluster gold-2.2.0.0]$ make gui
> > [gold at cluster gold-2.2.0.0]$ su
> > [root at cluster gold-2.2.0.0]# *make deps*
> > [root at cluster gold-2.2.0.0]# make install
> > [root at cluster gold-2.2.0.0]# make install-gui
> > [root at cluster gold-2.2.0.0]# make install-gui
> > [root at cluster gold-2.2.0.0]# make auth_key
> > Enter your secret key (up to 80 characters and can include spaces):
> > sss
> > [root at cluster gold-2.2.0.0]# vim /opt/gold/etc/goldd.conf
> > # Gold Server Config File
> > 
> > super.user = gold
> > 
> > server.host = cluster.tripham.vn
> > server.port = 7112
> > 
> > database.datasource = DBI:Pg:dbname=gold;host=cluster.tripham.vn
> > # database.user = NONE
> > # database.password = NONE
> > 
> > response.chunksize = 100000
> > # currency.precision = 0
> > 
> > security.authentication = true
> > # security.encryption = false
> > 
> > account.autogen = true
> > allocation.autogen = true
> > # machine.autogen = false
> > 
> > [root at cluster gold-2.2.0.0]# vim /opt/gold/etc/gold.conf
> > Gold Client Config File
> > 
> > server.host = cluster.tripham.vn
> > server.port = 7112
> > # server.backup = NONE
> > 
> > security.authentication = true
> > # security.encryption = false
> > # security.token.type = symmetric
> > # wire.protocol = SSSRMAP
> > 
> > # response.chunking = false
> > # response.chunksize = 0
> > # currency.precision = 0
> > 
> > # account.show = Id,Name,Amount,Projects,Users,Machines,Description
> > # allocation.show =
> > Id,Account,Active,StartTime,EndTime,Amount,CreditLimit,Deposited
> > # balance.show =
> > Id,Name,Amount,Reserved,Balance,CreditLimit,Available
> > # job.show =
> > Id,JobId,User,Project,Machine,Queue,QualityOfService,Stage,Charge,Processors,Nodes,WallDuration,StartTime,EndTime,Description
> > 
> > step8:
> > 
> > [postgress at cluster postgresql-8.3.3]$ /usr/local/pgsql/bin/initdb
> > -D
> > /usr/local/pgsql/data
> > [postgress at cluster postgresql-8.3.3]$ echo "host all all
> > 172.16.1.70
> > 255.255.255.255 trust">>/usr/local/pgsql/data/pg_hba.conf
> > step9:
> > [postgress at cluster postgresql-8.3.3]$
> > /usr/local/pgsql/bin/postmaster -i -D
> > /usr/local/pgsql/data
> > LOG:  database system was shut down at 2011-09-28 19:58:45 ICT
> > LOG:  autovacuum launcher started
> > LOG:  database system is ready to accept connections
> > [postgress at cluster postgresql-8.3.3]$
> > /usr/local/pgsql/bin/postmaster -i -D
> > /usr/local/pgsql/data >/var/log/pgsql 2>&1 &
> > [1] 17250
> > step10:
> > [postgress at cluster postgresql-8.3.3]$
> > /usr/local/pgsql/bin/createuser gold
> > Shall the new role be a superuser? (y/n) n
> > Shall the new role be allowed to create databases? (y/n) y
> > Shall the new role be allowed to create more new roles? (y/n) y
> > [postgress at cluster postgresql-8.3.3]$ /usr/local/pgsql/bin/createdb
> > gold
> > 
> > step11:
> > [root at cluster ~]# cd /etc/httpd/conf
> > [root at cluster conf]# vim httpd.conf
> > edit line
> > #</Directory>
> > <Directory "/var/www/cgi-bin">
> >  Options ExecCGI
> >  AddHandler cgi-script .cgi .pl
> > </Directory>
> > edit line
> > #ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
> > Alias /cgi-bin/ "/var/www/cgi-bin/gold"
> > 
> > add line
> > <VirtualHost 172.16.1.70:443>
> >  DocumentRoot /var/www/cgi-bin
> >  ServerName cluster.tripham.vn
> >  ServerAdmin root at cluster.tripham.vn
> >  ErrorLog logs/gold-error_log
> >  TransferLog logs/gold-access_log
> >  SSLEngine on
> >  SSLCertificateFile /etc/httpd/conf/ssl.crt/gold-server.crt
> >  SSLCertificateKeyFile /etc/httpd/conf/ssl.key/gold-server.key
> >  SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
> > </VirtualHost>
> > 
> > step12:
> > [root at cluster conf]# mkdir ssl.key
> > [root at cluster conf]# openssl genrsa -out ssl.key/gold-server.key
> > 1024
> > Generating RSA private key, 1024 bit long modulus
> > .......................++++++
> > .++++++
> > e is 65537 (0x10001)
> > [root at cluster ssl.crt]# mkdir ssl.crt
> > [root at cluster ssl.crt]# touch gold-server.crt
> > [root at cluster ssl.crt]# chmod +x gold-server.crt
> > 
> > step13:
> > [root at cluster conf]# openssl req -new -key ssl.key/gold-server.key
> > -x509
> > -out ssl.crt/gold-server.crt
> > You are about to be asked to enter information that will be
> > incorporated
> > into your certificate request.
> > What you are about to enter is what is called a Distinguished Name
> > or a DN.
> > There are quite a few fields but you can leave some blank
> > For some fields there will be a default value,
> > If you enter '.', the field will be left blank.
> > -----
> > Country Name (2 letter code) [GB]:84
> > State or Province Name (full name) [Berkshire]:vn
> > Locality Name (eg, city) [Newbury]:hcm
> > Organization Name (eg, company) [My Company Ltd]:icst
> > Organizational Unit Name (eg, section) []:tech
> > Common Name (eg, your name or your server's hostname)
> > []:cluster.tripham.vn
> > Email Address []:root at cluster.tripham.vn
> > 
> > step14:
> > [root at cluster conf]# /usr/sbin/apachectl restart
> > [root at cluster conf]#
> > 
> > step15:
> > [gold at cluster bin]$ /opt/gold/bin/gchpasswd
> > Failed sending message: (Unable to connect to socket (Connection
> > refused)).
> > [gold at cluster bin]$
> > 
> > step16:
> > [root at cluster ~]# cd /home/gold/gold-2.2.0.0/
> > [root at cluster gold-2.2.0.0]# cp bank.sql /usr/local/pgsql/
> > [root at cluster gold-2.2.0.0]# chown postgress
> > /usr/local/pgsql/bank.sql
> > [postgress at cluster pgsql]$ chmod +x bank.sql
> > [postgress at cluster pgsql]$ /usr/local/pgsql/bin/psql gold <bank.sql
> > INSERT 0 1
> > INSERT 0 1
> > INSERT 0 1
> > INSERT 0 1
> > INSERT 0 1
> > INSERT 0 1
> > INSERT 0 1
> > 
> > step17:
> > [postgress at cluster pgsql]$ /opt/gold/sbin/goldd
> > [gold at cluster gold-2.2.0.0]$ /opt/gold/sbin/goldd
> > Starting Gold Pid (19106)
> > [gold at cluster gold-2.2.0.0]$ DBD::Pg::st execute failed: ERROR:
> >  permission
> > denied for relation g_object at /opt/gold/lib/Gold/Database.pm line
> > 673.
> > Exception caught while populating metadata cache: DBD::Pg::st
> > execute
> > failed:
> > ERROR:  permission denied for relation g_object at
> > /opt/gold/lib/Gold/Database.pm line 673.
> > 
> > 
> > On Wed, Sep 28, 2011 at 10:47 PM, Scott Jackson <
> > scottmo at adaptivecomputing.com> wrote:
> > 
> >> You missed the make deps step.
> >> 
> >> ------------------------------
> >> 
> >> *From: *"truongco nguyen" <truongcophysics at gmail.com>
> >> *To: *gold-users at supercluster.org
> >> *Sent: *Wednesday, September 28, 2011 7:51:53 AM
> >> *Subject: *[gold-users] ICST-gold
> >> 
> >> 
> >> Dear
> >> 
> >> I am trying to install gold in Rock 5.4. But in installing process
> >> i
> >> encountered a problem like that:
> >> 
> >> [postgress at cluster pgsql]$ */opt/gold/sbin/goldd*
> >> 
> >> *Can't locate Log/Log4perl.pm in @INC (@INC contains:
> >> /opt/gold/lib*
> >> */opt/gold/lib/perl5 /usr/local/lib/perl5/5.10.0/x86_64-linux*
> >> */usr/local/lib/perl5/5.10.0
> >> /usr/local/lib/perl5/site_perl/5.10.0/x86_64-linux*
> >> */usr/local/lib/perl5/site_perl/5.10.0 .) at /opt/gold/sbin/goldd
> >> line 52.
> >> *
> >> *BEGIN failed--compilation aborted at /opt/gold/sbin/goldd line
> >> 52.*
> >> *
> >> *
> >> I don't know how to fix it? Any clues are high appreciated? * *
> >> *
> >> *
> >> Thank you very much
> >> *
> >> *
> >> Below are steps i crossed :
> >> 
> >> step 1: create user
> >> adduser gold
> >> adduser postgress
> >> step2:
> >> [root at cluster source]# cp gold-2.2.0.0.tar.gz /home/gold/
> >> [root at cluster source]# chown gold:gold /home/gold/
> >> step3:
> >> su gold
> >> [gold at cluster ~]$ tar -zxvf gold-2.2.0.0.tar.gz
> >> [gold at cluster ~]$ cd gold-2.2.0.0
> >> step4:
> >> [root at cluster source]# tar -zxvf postgresql-8.3.3.tar.gz
> >> [root at cluster source]# cd postgresql-8.3.3
> >> step5:
> >> [root at cluster postgresql-8.3.3]# ./configure
> >> report:
> >> configure: creating ./config.status
> >> config.status: creating GNUmakefile
> >> config.status: creating src/Makefile.global
> >> config.status: creating src/include/pg_config.h
> >> config.status: creating src/interfaces/ecpg/include/ecpg_config.h
> >> config.status: linking ./src/backend/port/tas/dummy.s to
> >> src/backend/port/tas.s
> >> config.status: linking ./src/backend/port/dynloader/linux.c to
> >> src/backend/port/dynloader.c
> >> config.status: linking ./src/backend/port/sysv_sema.c to
> >> src/backend/port/pg_sema.c
> >> config.status: linking ./src/backend/port/sysv_shmem.c to
> >> src/backend/port/pg_shmem.c
> >> config.status: linking ./src/backend/port/dynloader/linux.h to
> >> src/include/dynloader.h
> >> config.status: linking ./src/include/port/linux.h to
> >> src/include/pg_config_os.h
> >> config.status: linking ./src/makefiles/Makefile.linux to
> >> src/Makefile.port
> >> 
> >> step6:
> >> 
> >> [root at cluster postgresql-8.3.3]# make
> >> step7:
> >> 
> >> [root at cluster postgresql-8.3.3]# make install
> >> [root at cluster postgresql-8.3.3]# mkdir /usr/local/pgsql/data
> >> [root at cluster postgresql-8.3.3]# chown postgress
> >> /usr/local/pgsql/data
> >> [root at cluster postgresql-8.3.3]# touch /var/log/pgsql
> >> [root at cluster postgresql-8.3.3]# chown postgress /var/log/pgsql
> >> 
> >> [root at cluster postgresql-8.3.3]# rpm -qa | grep perl
> >> perl-5.8.8-32.el5_5.2
> >> perl-suidperl-5.8.8-32.el5_5.2
> >> 
> >> [root at cluster postgresql-8.3.3]# rpm -qa |grep libxml
> >> foundation-libxml2-2.6.23-0
> >> libxml2-2.6.26-2.1.2.8.el5_5.1
> >> libxml2-2.6.26-2.1.2.8.el5_5.1
> >> libxml2-devel-2.6.26-2.1.2.8.el5_5.1
> >> libxml2-python-2.6.26-2.1.2.8.el5_5.1
> >> 
> >> [root at cluster postgresql-8.3.3]# rpm -qa |grep readline
> >> readline-5.1-3.el5
> >> readline-5.1-3.el5
> >> foundation-readline-5.1-0
> >> readline-devel-5.1-3.el5
> >> 
> >> [root at cluster postgresql-8.3.3]# rpm -qa |grep httpd
> >> httpd-devel-2.2.3-43.el5.centos.3
> >> httpd-devel-2.2.3-43.el5.centos.3
> >> httpd-2.2.3-43.el5.centos.3
> >> 
> >> [root at cluster postgresql-8.3.3]# rpm -qa |grep openssl
> >> openssl-0.9.8e-12.el5_4.6
> >> openssl-0.9.8e-12.el5_4.6
> >> openssl-devel-0.9.8e-12.el5_4.6
> >> openssl-devel-0.9.8e-12.el5_4.6
> >> [root at cluster postgresql-8.3.3]# rpm -qa |grep mod_ssl
> >> mod_ssl-2.2.3-43.el5.centos.3
> >> 
> >> [gold at cluster gold-2.2.0.0]$ ./configure --with-db=Pg
> >> --with-readline
> >> --with-user=gold --with-perl-libs=local --with-gold-libs=local
> >> --with-cgi-bin=/var/www/cgi-bin/gold
> >> [gold at cluster gold-2.2.0.0]$ make
> >> [gold at cluster gold-2.2.0.0]$ make gui
> >> [gold at cluster gold-2.2.0.0]$ su
> >> [root at cluster gold-2.2.0.0]# make install
> >> [root at cluster gold-2.2.0.0]# make install-gui
> >> [root at cluster gold-2.2.0.0]# make auth_key
> >> Enter your secret key (up to 80 characters and can include
> >> spaces): sss
> >> [root at cluster gold-2.2.0.0]# vim /opt/gold/etc/goldd.conf
> >> # Gold Server Config File
> >> 
> >> super.user = gold
> >> 
> >> server.host = cluster.tripham.vn
> >> server.port = 7112
> >> 
> >> database.datasource = DBI:Pg:dbname=gold;host=cluster.tripham.vn
> >> # database.user = NONE
> >> # database.password = NONE
> >> 
> >> response.chunksize = 100000
> >> # currency.precision = 0
> >> 
> >> security.authentication = true
> >> # security.encryption = false
> >> 
> >> account.autogen = true
> >> allocation.autogen = true
> >> # machine.autogen = false
> >> 
> >> [root at cluster gold-2.2.0.0]# vim /opt/gold/etc/gold.conf
> >> Gold Client Config File
> >> 
> >> server.host = cluster.tripham.vn
> >> server.port = 7112
> >> # server.backup = NONE
> >> 
> >> security.authentication = true
> >> # security.encryption = false
> >> # security.token.type = symmetric
> >> # wire.protocol = SSSRMAP
> >> 
> >> # response.chunking = false
> >> # response.chunksize = 0
> >> # currency.precision = 0
> >> 
> >> # account.show =
> >> Id,Name,Amount,Projects,Users,Machines,Description
> >> # allocation.show =
> >> Id,Account,Active,StartTime,EndTime,Amount,CreditLimit,Deposited
> >> # balance.show =
> >> Id,Name,Amount,Reserved,Balance,CreditLimit,Available
> >> # job.show =
> >> Id,JobId,User,Project,Machine,Queue,QualityOfService,Stage,Charge,Processors,Nodes,WallDuration,StartTime,EndTime,Description
> >> 
> >> step8:
> >> 
> >> [postgress at cluster postgresql-8.3.3]$ /usr/local/pgsql/bin/initdb
> >> -D
> >> /usr/local/pgsql/data
> >> [postgress at cluster postgresql-8.3.3]$ echo "host all all
> >> 172.16.1.70
> >> 255.255.255.255 trust">>/usr/local/pgsql/data/pg_hba.conf
> >> step9:
> >> [postgress at cluster postgresql-8.3.3]$
> >> /usr/local/pgsql/bin/postmaster -i
> >> -D /usr/local/pgsql/data
> >> LOG:  database system was shut down at 2011-09-28 19:58:45 ICT
> >> LOG:  autovacuum launcher started
> >> LOG:  database system is ready to accept connections
> >> [postgress at cluster postgresql-8.3.3]$
> >> /usr/local/pgsql/bin/postmaster -i
> >> -D /usr/local/pgsql/data >/var/log/pgsql 2>&1 &
> >> [1] 17250
> >> step10:
> >> [postgress at cluster postgresql-8.3.3]$
> >> /usr/local/pgsql/bin/createuser
> >> gold
> >> Shall the new role be a superuser? (y/n) n
> >> Shall the new role be allowed to create databases? (y/n) y
> >> Shall the new role be allowed to create more new roles? (y/n) y
> >> [postgress at cluster postgresql-8.3.3]$
> >> /usr/local/pgsql/bin/createdb gold
> >> 
> >> step11:
> >> [root at cluster ~]# cd /etc/httpd/conf
> >> [root at cluster conf]# vim httpd.conf
> >> edit line
> >> #</Directory>
> >> <Directory "/var/www/cgi-bin">
> >>  Options ExecCGI
> >>  AddHandler cgi-script .cgi .pl
> >> </Directory>
> >> edit line
> >> #ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
> >> Alias /cgi-bin/ "/var/www/cgi-bin/gold"
> >> 
> >> add line
> >> <VirtualHost 172.16.1.70:443>
> >>  DocumentRoot /var/www/cgi-bin
> >>  ServerName cluster.tripham.vn
> >>  ServerAdmin root at cluster.tripham.vn
> >>  ErrorLog logs/gold-error_log
> >>  TransferLog logs/gold-access_log
> >>  SSLEngine on
> >>  SSLCertificateFile /etc/httpd/conf/ssl.crt/gold-server.crt
> >>  SSLCertificateKeyFile /etc/httpd/conf/ssl.key/gold-server.key
> >>  SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
> >> </VirtualHost>
> >> 
> >> step12:
> >> [root at cluster conf]# mkdir ssl.key
> >> [root at cluster conf]# openssl genrsa -out ssl.key/gold-server.key
> >> 1024
> >> Generating RSA private key, 1024 bit long modulus
> >> .......................++++++
> >> .++++++
> >> e is 65537 (0x10001)
> >> [root at cluster ssl.crt]# mkdir ssl.crt
> >> [root at cluster ssl.crt]# touch gold-server.crt
> >> [root at cluster ssl.crt]# chmod +x gold-server.crt
> >> 
> >> step13:
> >> [root at cluster conf]# openssl req -new -key ssl.key/gold-server.key
> >> -x509
> >> -out ssl.crt/gold-server.crt
> >> You are about to be asked to enter information that will be
> >> incorporated
> >> into your certificate request.
> >> What you are about to enter is what is called a Distinguished Name
> >> or a DN.
> >> There are quite a few fields but you can leave some blank
> >> For some fields there will be a default value,
> >> If you enter '.', the field will be left blank.
> >> -----
> >> Country Name (2 letter code) [GB]:84
> >> State or Province Name (full name) [Berkshire]:vn
> >> Locality Name (eg, city) [Newbury]:hcm
> >> Organization Name (eg, company) [My Company Ltd]:icst
> >> Organizational Unit Name (eg, section) []:tech
> >> Common Name (eg, your name or your server's hostname) []:
> >> cluster.tripham.vn
> >> Email Address []:root at cluster.tripham.vn
> >> 
> >> step14:
> >> [root at cluster conf]# /usr/sbin/apachectl restart
> >> [root at cluster conf]#
> >> 
> >> step15:
> >> [root at cluster ~]# gchpasswd
> >> Can't locate Log/Log4perl.pm in @INC (@INC contains: /opt/gold/lib
> >> /opt/gold/lib/perl5 /usr/local/lib/perl5/5.10.0/x86_64-linux
> >> /usr/local/lib/perl5/5.10.0
> >> /usr/local/lib/perl5/site_perl/5.10.0/x86_64-linux
> >> /usr/local/lib/perl5/site_perl/5.10.0) at /opt/gold/lib/Gold.pm
> >> line 108.
> >> BEGIN failed--compilation aborted at /opt/gold/lib/Gold.pm line
> >> 108.
> >> Compilation failed in require at /opt/gold/bin/gchpasswd line 52.
> >> BEGIN failed--compilation aborted at /opt/gold/bin/gchpasswd line
> >> 52.
> >> 
> >> step16:
> >> [root at cluster ~]# cd /home/gold/gold-2.2.0.0/
> >> [root at cluster gold-2.2.0.0]# cp bank.sql /usr/local/pgsql/
> >> [root at cluster gold-2.2.0.0]# chown postgress
> >> /usr/local/pgsql/bank.sql
> >> [postgress at cluster pgsql]$ chmod +x bank.sql
> >> [postgress at cluster pgsql]$ /usr/local/pgsql/bin/psql gold
> >> <bank.sql
> >> INSERT 0 1
> >> INSERT 0 1
> >> INSERT 0 1
> >> INSERT 0 1
> >> INSERT 0 1
> >> INSERT 0 1
> >> INSERT 0 1
> >> 
> >> step17:
> >> [postgress at cluster pgsql]$ /opt/gold/sbin/goldd
> >> Can't locate Log/Log4perl.pm in @INC (@INC contains: /opt/gold/lib
> >> /opt/gold/lib/perl5 /usr/local/lib/perl5/5.10.0/x86_64-linux
> >> /usr/local/lib/perl5/5.10.0
> >> /usr/local/lib/perl5/site_perl/5.10.0/x86_64-linux
> >> /usr/local/lib/perl5/site_perl/5.10.0 .) at /opt/gold/sbin/goldd
> >> line 52.
> >> BEGIN failed--compilation aborted at /opt/gold/sbin/goldd line 52.
> >> 
> >> --
> >> Nguyen Truong Co
> >> Institute for Computational Science and Technology
> >> Researcher of Life Science Lab
> >> 
> >> 
> >> _______________________________________________
> >> gold-users mailing list
> >> gold-users at supercluster.org
> >> http://www.supercluster.org/mailman/listinfo/gold-users
> >> 
> >> 
> >> 
> >> _______________________________________________
> >> gold-users mailing list
> >> gold-users at supercluster.org
> >> http://www.supercluster.org/mailman/listinfo/gold-users
> >> 
> >> 
> > 
> > 
> > --
> > Nguyen Truong Co
> > Institute for Computational Science and Technology
> > Researcher of Life Science Lab
> > _______________________________________________
> > gold-users mailing list
> > gold-users at supercluster.org
> > http://www.supercluster.org/mailman/listinfo/gold-users
> 
>  ----------------------
>  Steve Crusan
>  System Administrator
>  Center for Research Computing
>  University of Rochester
>  https://www.crc.rochester.edu/
> 
> 
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG/MacGPG2 v2.0.17 (Darwin)
> Comment: GPGTools - http://gpgtools.org
> 
> iQEcBAEBAgAGBQJOg1T/AAoJENS19LGOpgqKzjcH/1iuUHK7V0toQ2K4kCdB1y+m
> m8knMCPySEhmWGd7TiaAMdlm1Wg00HzPcGO47InX8pQ3dTJWXmSb36l8M1RMBK3O
> Ujz1ILdV0pd5wSRZK6Yl8upOdZDHzSe3YQlSDWuF8plA0T70n4pl5kCphjrKLXs5
> /GUHIvzmD+vMwVRscUO168+wNynq+y7Wdr75d88U02/jPWo08rSYPDWLU5XSMOWO
> SuL+kstQce+EN9KxGYgvtJ+7knTlWUOxT4acNnQTQJZqAQDKy1fJXPAYqjKcgcwz
> mixnlFrN9Kf2UYmLmF9NxHUfVU9FiclJkFzSiyUvN9whwdxXLy6BZnocNSEHKes=
> =Eus7
> -----END PGP SIGNATURE-----
> _______________________________________________
> gold-users mailing list
> gold-users at supercluster.org
> http://www.supercluster.org/mailman/listinfo/gold-users
> 


More information about the gold-users mailing list