[gold-users] ICST-gold

truongco nguyen truongcophysics at gmail.com
Sun Oct 2 03:15:34 MDT 2011


Dear

Thank you very much for your help. After take much time to configure. The
gold could launch as gui. But i don't understand why i can't do anything
with gui.
In the web brower interface i  saw the manage and logout button but only the
log out button work and manage button is not. I wonder what happen with my
configure.
Could you give us more advice, please. Thank you in advance.
I attached in this email the gui which i got.

Co

On Thu, Sep 29, 2011 at 11:08 PM, Scott Jackson <
scottmo at adaptivecomputing.com> wrote:

> This would be because the gold server had not been started.
>
> At one point, our documentation was flawed in that it referred to the
> gchpasswd command before it referred to starting gold. Recent distributions
> have fixed this in the INSTALL file and the installation documentation
> included in the tarball under the doc directory. However, I have verified
> that the online documentation still has this flaw. I will try to get it
> updated on the web docs.
>
> The remedy, of course, is to start the goldd server before trying to run
> any commands against it:)
>
> Scott
>
> ------------------------------
>
> *From: *"truongco nguyen" <truongcophysics at gmail.com>
>
> *To: *"Gold Users Mailing List" <gold-users at supercluster.org>
> *Sent: *Thursday, September 29, 2011 2:10:37 AM
>
> *Subject: *Re: [gold-users] ICST-gold
>
> Dear
>
> Thanks you very much for your help. After doing the same your advice, it
> didn't work.  But when we researched all bugs, we found out the first one
> was :
>
>  *[root at cluster conf]# /opt/gold/bin/gchpasswd     *
> * Failed sending message: (Unable to connect to socket (Connection
> refused))*
> *
> *
> Could you give us any clues?
>
> Thank you in advance
>
> * Co*
>
> On Thu, Sep 29, 2011 at 1:00 AM, Scott Jackson <
> scottmo at adaptivecomputing.com> wrote:
>
>> Yes, make sure you run the createdb and psql commands as the gold user (or
>> the userid that goldd will run under).
>>
>>
>> ----- Original Message -----
>> > From: "Steve Crusan" <scrusan at ur.rochester.edu>
>> > To: "Gold Users Mailing List" <gold-users at supercluster.org>
>> > Sent: Wednesday, September 28, 2011 11:10:16 AM
>> > Subject: Re: [gold-users] ICST-gold
>> >
>> > -----BEGIN PGP SIGNED MESSAGE-----
>> > Hash: SHA1
>> >
>> > It would be probably be easier for the list to read if you posted the
>> > last few error messages than posting the whole setup steps each
>> > time...
>> >
>> > That being said, is the gold user the owner of the postgresql
>> > database, and also allowed to connect to it?
>> >
>> > If you connect to the postgres db, check the database ownership:
>> > postgres=> \l
>> >         List of databases
>> >    Name    |  Owner   | Encoding
>> > - -----------+----------+----------
>> >  gold      | gold     | UTF8
>> >
>> >
>> > Also, make sure you have a line in your
>> > postgres_root/data/pg_hba.conf that is something like this:
>> >
>> > # IPv4 local connections:
>> > host    gold        gold        127.0.0.1/32          md5
>> >
>> > You should be able to connect from the commandline via:
>> > psql -U gold -d gold -h localhost -W
>> > Enter passwd:
>> >
>> > That password you entered needs to match the password in your
>> > $gold_root/etc/goldd.conf
>> > database.password = mypass
>> >
>> > After you make changes to your postgres pg_hba.conf file, you need to
>> > restart postgres, and also the gold service.
>> >
>> >
>> > On Sep 28, 2011, at 12:30 PM, truongco nguyen wrote:
>> >
>> > > Thank you very much for your help, but when i finish the make deps
>> > > step. The
>> > > new bug turn out.  Any helps please?
>> > >
>> > > Thanks you in advance!
>> > >
>> > > Following is updated step.
>> > >
>> > > step 1: create user
>> > > adduser gold
>> > > adduser postgress
>> > > step2:
>> > > [root at cluster source]# cp gold-2.2.0.0.tar.gz /home/gold/
>> > > [root at cluster source]# chown gold:gold /home/gold/
>> > > step3:
>> > > su gold
>> > > [gold at cluster ~]$ tar -zxvf gold-2.2.0.0.tar.gz
>> > > [gold at cluster ~]$ cd gold-2.2.0.0
>> > > step4:
>> > > [root at cluster source]# tar -zxvf postgresql-8.3.3.tar.gz
>> > > [root at cluster source]# cd postgresql-8.3.3
>> > > step5:
>> > > [root at cluster postgresql-8.3.3]# ./configure
>> > > report:
>> > > configure: creating ./config.status
>> > > config.status: creating GNUmakefile
>> > > config.status: creating src/Makefile.global
>> > > config.status: creating src/include/pg_config.h
>> > > config.status: creating src/interfaces/ecpg/include/ecpg_config.h
>> > > config.status: linking ./src/backend/port/tas/dummy.s to
>> > > src/backend/port/tas.s
>> > > config.status: linking ./src/backend/port/dynloader/linux.c to
>> > > src/backend/port/dynloader.c
>> > > config.status: linking ./src/backend/port/sysv_sema.c to
>> > > src/backend/port/pg_sema.c
>> > > config.status: linking ./src/backend/port/sysv_shmem.c to
>> > > src/backend/port/pg_shmem.c
>> > > config.status: linking ./src/backend/port/dynloader/linux.h to
>> > > src/include/dynloader.h
>> > > config.status: linking ./src/include/port/linux.h to
>> > > src/include/pg_config_os.h
>> > > config.status: linking ./src/makefiles/Makefile.linux to
>> > > src/Makefile.port
>> > >
>> > > step6:
>> > >
>> > > [root at cluster postgresql-8.3.3]# make
>> > > step7:
>> > >
>> > > [root at cluster postgresql-8.3.3]# make install
>> > > [root at cluster postgresql-8.3.3]# mkdir /usr/local/pgsql/data
>> > > [root at cluster postgresql-8.3.3]# chown postgress
>> > > /usr/local/pgsql/data
>> > > [root at cluster postgresql-8.3.3]# touch /var/log/pgsql
>> > > [root at cluster postgresql-8.3.3]# chown postgress /var/log/pgsql
>> > >
>> > > [root at cluster postgresql-8.3.3]# rpm -qa | grep perl
>> > > perl-5.8.8-32.el5_5.2
>> > > perl-suidperl-5.8.8-32.el5_5.2
>> > >
>> > > [root at cluster postgresql-8.3.3]# rpm -qa |grep libxml
>> > > foundation-libxml2-2.6.23-0
>> > > libxml2-2.6.26-2.1.2.8.el5_5.1
>> > > libxml2-2.6.26-2.1.2.8.el5_5.1
>> > > libxml2-devel-2.6.26-2.1.2.8.el5_5.1
>> > > libxml2-python-2.6.26-2.1.2.8.el5_5.1
>> > >
>> > > [root at cluster postgresql-8.3.3]# rpm -qa |grep readline
>> > > readline-5.1-3.el5
>> > > readline-5.1-3.el5
>> > > foundation-readline-5.1-0
>> > > readline-devel-5.1-3.el5
>> > >
>> > > [root at cluster postgresql-8.3.3]# rpm -qa |grep httpd
>> > > httpd-devel-2.2.3-43.el5.centos.3
>> > > httpd-devel-2.2.3-43.el5.centos.3
>> > > httpd-2.2.3-43.el5.centos.3
>> > >
>> > > [root at cluster postgresql-8.3.3]# rpm -qa |grep openssl
>> > > openssl-0.9.8e-12.el5_4.6
>> > > openssl-0.9.8e-12.el5_4.6
>> > > openssl-devel-0.9.8e-12.el5_4.6
>> > > openssl-devel-0.9.8e-12.el5_4.6
>> > > [root at cluster postgresql-8.3.3]# rpm -qa |grep mod_ssl
>> > > mod_ssl-2.2.3-43.el5.centos.3
>> > >
>> > > [gold at cluster gold-2.2.0.0]$ ./configure --with-db=Pg
>> > > --with-readline
>> > > --with-user=gold --with-perl-libs=local --with-gold-libs=local
>> > > --with-cgi-bin=/var/www/cgi-bin/gold
>> > > [gold at cluster gold-2.2.0.0]$ make
>> > > [gold at cluster gold-2.2.0.0]$ make gui
>> > > [gold at cluster gold-2.2.0.0]$ su
>> > > [root at cluster gold-2.2.0.0]# *make deps*
>> > > [root at cluster gold-2.2.0.0]# make install
>> > > [root at cluster gold-2.2.0.0]# make install-gui
>> > > [root at cluster gold-2.2.0.0]# make install-gui
>> > > [root at cluster gold-2.2.0.0]# make auth_key
>> > > Enter your secret key (up to 80 characters and can include spaces):
>> > > sss
>> > > [root at cluster gold-2.2.0.0]# vim /opt/gold/etc/goldd.conf
>> > > # Gold Server Config File
>> > >
>> > > super.user = gold
>> > >
>> > > server.host = cluster.tripham.vn
>> > > server.port = 7112
>> > >
>> > > database.datasource = DBI:Pg:dbname=gold;host=cluster.tripham.vn
>> > > # database.user = NONE
>> > > # database.password = NONE
>> > >
>> > > response.chunksize = 100000
>> > > # currency.precision = 0
>> > >
>> > > security.authentication = true
>> > > # security.encryption = false
>> > >
>> > > account.autogen = true
>> > > allocation.autogen = true
>> > > # machine.autogen = false
>> > >
>> > > [root at cluster gold-2.2.0.0]# vim /opt/gold/etc/gold.conf
>> > > Gold Client Config File
>> > >
>> > > server.host = cluster.tripham.vn
>> > > server.port = 7112
>> > > # server.backup = NONE
>> > >
>> > > security.authentication = true
>> > > # security.encryption = false
>> > > # security.token.type = symmetric
>> > > # wire.protocol = SSSRMAP
>> > >
>> > > # response.chunking = false
>> > > # response.chunksize = 0
>> > > # currency.precision = 0
>> > >
>> > > # account.show = Id,Name,Amount,Projects,Users,Machines,Description
>> > > # allocation.show =
>> > > Id,Account,Active,StartTime,EndTime,Amount,CreditLimit,Deposited
>> > > # balance.show =
>> > > Id,Name,Amount,Reserved,Balance,CreditLimit,Available
>> > > # job.show =
>> > >
>> Id,JobId,User,Project,Machine,Queue,QualityOfService,Stage,Charge,Processors,Nodes,WallDuration,StartTime,EndTime,Description
>> > >
>> > > step8:
>> > >
>> > > [postgress at cluster postgresql-8.3.3]$ /usr/local/pgsql/bin/initdb
>> > > -D
>> > > /usr/local/pgsql/data
>> > > [postgress at cluster postgresql-8.3.3]$ echo "host all all
>> > > 172.16.1.70
>> > > 255.255.255.255 trust">>/usr/local/pgsql/data/pg_hba.conf
>> > > step9:
>> > > [postgress at cluster postgresql-8.3.3]$
>> > > /usr/local/pgsql/bin/postmaster -i -D
>> > > /usr/local/pgsql/data
>> > > LOG:  database system was shut down at 2011-09-28 19:58:45 ICT
>> > > LOG:  autovacuum launcher started
>> > > LOG:  database system is ready to accept connections
>> > > [postgress at cluster postgresql-8.3.3]$
>> > > /usr/local/pgsql/bin/postmaster -i -D
>> > > /usr/local/pgsql/data >/var/log/pgsql 2>&1 &
>> > > [1] 17250
>> > > step10:
>> > > [postgress at cluster postgresql-8.3.3]$
>> > > /usr/local/pgsql/bin/createuser gold
>> > > Shall the new role be a superuser? (y/n) n
>> > > Shall the new role be allowed to create databases? (y/n) y
>> > > Shall the new role be allowed to create more new roles? (y/n) y
>> > > [postgress at cluster postgresql-8.3.3]$ /usr/local/pgsql/bin/createdb
>> > > gold
>> > >
>> > > step11:
>> > > [root at cluster ~]# cd /etc/httpd/conf
>> > > [root at cluster conf]# vim httpd.conf
>> > > edit line
>> > > #</Directory>
>> > > <Directory "/var/www/cgi-bin">
>> > >  Options ExecCGI
>> > >  AddHandler cgi-script .cgi .pl
>> > > </Directory>
>> > > edit line
>> > > #ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
>> > > Alias /cgi-bin/ "/var/www/cgi-bin/gold"
>> > >
>> > > add line
>> > > <VirtualHost 172.16.1.70:443>
>> > >  DocumentRoot /var/www/cgi-bin
>> > >  ServerName cluster.tripham.vn
>> > >  ServerAdmin root at cluster.tripham.vn
>> > >  ErrorLog logs/gold-error_log
>> > >  TransferLog logs/gold-access_log
>> > >  SSLEngine on
>> > >  SSLCertificateFile /etc/httpd/conf/ssl.crt/gold-server.crt
>> > >  SSLCertificateKeyFile /etc/httpd/conf/ssl.key/gold-server.key
>> > >  SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
>> > > </VirtualHost>
>> > >
>> > > step12:
>> > > [root at cluster conf]# mkdir ssl.key
>> > > [root at cluster conf]# openssl genrsa -out ssl.key/gold-server.key
>> > > 1024
>> > > Generating RSA private key, 1024 bit long modulus
>> > > .......................++++++
>> > > .++++++
>> > > e is 65537 (0x10001)
>> > > [root at cluster ssl.crt]# mkdir ssl.crt
>> > > [root at cluster ssl.crt]# touch gold-server.crt
>> > > [root at cluster ssl.crt]# chmod +x gold-server.crt
>> > >
>> > > step13:
>> > > [root at cluster conf]# openssl req -new -key ssl.key/gold-server.key
>> > > -x509
>> > > -out ssl.crt/gold-server.crt
>> > > You are about to be asked to enter information that will be
>> > > incorporated
>> > > into your certificate request.
>> > > What you are about to enter is what is called a Distinguished Name
>> > > or a DN.
>> > > There are quite a few fields but you can leave some blank
>> > > For some fields there will be a default value,
>> > > If you enter '.', the field will be left blank.
>> > > -----
>> > > Country Name (2 letter code) [GB]:84
>> > > State or Province Name (full name) [Berkshire]:vn
>> > > Locality Name (eg, city) [Newbury]:hcm
>> > > Organization Name (eg, company) [My Company Ltd]:icst
>> > > Organizational Unit Name (eg, section) []:tech
>> > > Common Name (eg, your name or your server's hostname)
>> > > []:cluster.tripham.vn
>> > > Email Address []:root at cluster.tripham.vn
>> > >
>> > > step14:
>> > > [root at cluster conf]# /usr/sbin/apachectl restart
>> > > [root at cluster conf]#
>> > >
>> > > step15:
>> > > [gold at cluster bin]$ /opt/gold/bin/gchpasswd
>> > > Failed sending message: (Unable to connect to socket (Connection
>> > > refused)).
>> > > [gold at cluster bin]$
>> > >
>> > > step16:
>> > > [root at cluster ~]# cd /home/gold/gold-2.2.0.0/
>> > > [root at cluster gold-2.2.0.0]# cp bank.sql /usr/local/pgsql/
>> > > [root at cluster gold-2.2.0.0]# chown postgress
>> > > /usr/local/pgsql/bank.sql
>> > > [postgress at cluster pgsql]$ chmod +x bank.sql
>> > > [postgress at cluster pgsql]$ /usr/local/pgsql/bin/psql gold <bank.sql
>> > > INSERT 0 1
>> > > INSERT 0 1
>> > > INSERT 0 1
>> > > INSERT 0 1
>> > > INSERT 0 1
>> > > INSERT 0 1
>> > > INSERT 0 1
>> > >
>> > > step17:
>> > > [postgress at cluster pgsql]$ /opt/gold/sbin/goldd
>> > > [gold at cluster gold-2.2.0.0]$ /opt/gold/sbin/goldd
>> > > Starting Gold Pid (19106)
>> > > [gold at cluster gold-2.2.0.0]$ DBD::Pg::st execute failed: ERROR:
>> > >  permission
>> > > denied for relation g_object at /opt/gold/lib/Gold/Database.pm line
>> > > 673.
>> > > Exception caught while populating metadata cache: DBD::Pg::st
>> > > execute
>> > > failed:
>> > > ERROR:  permission denied for relation g_object at
>> > > /opt/gold/lib/Gold/Database.pm line 673.
>> > >
>> > >
>> > > On Wed, Sep 28, 2011 at 10:47 PM, Scott Jackson <
>> > > scottmo at adaptivecomputing.com> wrote:
>> > >
>> > >> You missed the make deps step.
>> > >>
>> > >> ------------------------------
>> > >>
>> > >> *From: *"truongco nguyen" <truongcophysics at gmail.com>
>> > >> *To: *gold-users at supercluster.org
>> > >> *Sent: *Wednesday, September 28, 2011 7:51:53 AM
>> > >> *Subject: *[gold-users] ICST-gold
>> > >>
>> > >>
>> > >> Dear
>> > >>
>> > >> I am trying to install gold in Rock 5.4. But in installing process
>> > >> i
>> > >> encountered a problem like that:
>> > >>
>> > >> [postgress at cluster pgsql]$ */opt/gold/sbin/goldd*
>> > >>
>> > >> *Can't locate Log/Log4perl.pm in @INC (@INC contains:
>> > >> /opt/gold/lib*
>> > >> */opt/gold/lib/perl5 /usr/local/lib/perl5/5.10.0/x86_64-linux*
>> > >> */usr/local/lib/perl5/5.10.0
>> > >> /usr/local/lib/perl5/site_perl/5.10.0/x86_64-linux*
>> > >> */usr/local/lib/perl5/site_perl/5.10.0 .) at /opt/gold/sbin/goldd
>> > >> line 52.
>> > >> *
>> > >> *BEGIN failed--compilation aborted at /opt/gold/sbin/goldd line
>> > >> 52.*
>> > >> *
>> > >> *
>> > >> I don't know how to fix it? Any clues are high appreciated? * *
>> > >> *
>> > >> *
>> > >> Thank you very much
>> > >> *
>> > >> *
>> > >> Below are steps i crossed :
>> > >>
>> > >> step 1: create user
>> > >> adduser gold
>> > >> adduser postgress
>> > >> step2:
>> > >> [root at cluster source]# cp gold-2.2.0.0.tar.gz /home/gold/
>> > >> [root at cluster source]# chown gold:gold /home/gold/
>> > >> step3:
>> > >> su gold
>> > >> [gold at cluster ~]$ tar -zxvf gold-2.2.0.0.tar.gz
>> > >> [gold at cluster ~]$ cd gold-2.2.0.0
>> > >> step4:
>> > >> [root at cluster source]# tar -zxvf postgresql-8.3.3.tar.gz
>> > >> [root at cluster source]# cd postgresql-8.3.3
>> > >> step5:
>> > >> [root at cluster postgresql-8.3.3]# ./configure
>> > >> report:
>> > >> configure: creating ./config.status
>> > >> config.status: creating GNUmakefile
>> > >> config.status: creating src/Makefile.global
>> > >> config.status: creating src/include/pg_config.h
>> > >> config.status: creating src/interfaces/ecpg/include/ecpg_config.h
>> > >> config.status: linking ./src/backend/port/tas/dummy.s to
>> > >> src/backend/port/tas.s
>> > >> config.status: linking ./src/backend/port/dynloader/linux.c to
>> > >> src/backend/port/dynloader.c
>> > >> config.status: linking ./src/backend/port/sysv_sema.c to
>> > >> src/backend/port/pg_sema.c
>> > >> config.status: linking ./src/backend/port/sysv_shmem.c to
>> > >> src/backend/port/pg_shmem.c
>> > >> config.status: linking ./src/backend/port/dynloader/linux.h to
>> > >> src/include/dynloader.h
>> > >> config.status: linking ./src/include/port/linux.h to
>> > >> src/include/pg_config_os.h
>> > >> config.status: linking ./src/makefiles/Makefile.linux to
>> > >> src/Makefile.port
>> > >>
>> > >> step6:
>> > >>
>> > >> [root at cluster postgresql-8.3.3]# make
>> > >> step7:
>> > >>
>> > >> [root at cluster postgresql-8.3.3]# make install
>> > >> [root at cluster postgresql-8.3.3]# mkdir /usr/local/pgsql/data
>> > >> [root at cluster postgresql-8.3.3]# chown postgress
>> > >> /usr/local/pgsql/data
>> > >> [root at cluster postgresql-8.3.3]# touch /var/log/pgsql
>> > >> [root at cluster postgresql-8.3.3]# chown postgress /var/log/pgsql
>> > >>
>> > >> [root at cluster postgresql-8.3.3]# rpm -qa | grep perl
>> > >> perl-5.8.8-32.el5_5.2
>> > >> perl-suidperl-5.8.8-32.el5_5.2
>> > >>
>> > >> [root at cluster postgresql-8.3.3]# rpm -qa |grep libxml
>> > >> foundation-libxml2-2.6.23-0
>> > >> libxml2-2.6.26-2.1.2.8.el5_5.1
>> > >> libxml2-2.6.26-2.1.2.8.el5_5.1
>> > >> libxml2-devel-2.6.26-2.1.2.8.el5_5.1
>> > >> libxml2-python-2.6.26-2.1.2.8.el5_5.1
>> > >>
>> > >> [root at cluster postgresql-8.3.3]# rpm -qa |grep readline
>> > >> readline-5.1-3.el5
>> > >> readline-5.1-3.el5
>> > >> foundation-readline-5.1-0
>> > >> readline-devel-5.1-3.el5
>> > >>
>> > >> [root at cluster postgresql-8.3.3]# rpm -qa |grep httpd
>> > >> httpd-devel-2.2.3-43.el5.centos.3
>> > >> httpd-devel-2.2.3-43.el5.centos.3
>> > >> httpd-2.2.3-43.el5.centos.3
>> > >>
>> > >> [root at cluster postgresql-8.3.3]# rpm -qa |grep openssl
>> > >> openssl-0.9.8e-12.el5_4.6
>> > >> openssl-0.9.8e-12.el5_4.6
>> > >> openssl-devel-0.9.8e-12.el5_4.6
>> > >> openssl-devel-0.9.8e-12.el5_4.6
>> > >> [root at cluster postgresql-8.3.3]# rpm -qa |grep mod_ssl
>> > >> mod_ssl-2.2.3-43.el5.centos.3
>> > >>
>> > >> [gold at cluster gold-2.2.0.0]$ ./configure --with-db=Pg
>> > >> --with-readline
>> > >> --with-user=gold --with-perl-libs=local --with-gold-libs=local
>> > >> --with-cgi-bin=/var/www/cgi-bin/gold
>> > >> [gold at cluster gold-2.2.0.0]$ make
>> > >> [gold at cluster gold-2.2.0.0]$ make gui
>> > >> [gold at cluster gold-2.2.0.0]$ su
>> > >> [root at cluster gold-2.2.0.0]# make install
>> > >> [root at cluster gold-2.2.0.0]# make install-gui
>> > >> [root at cluster gold-2.2.0.0]# make auth_key
>> > >> Enter your secret key (up to 80 characters and can include
>> > >> spaces): sss
>> > >> [root at cluster gold-2.2.0.0]# vim /opt/gold/etc/goldd.conf
>> > >> # Gold Server Config File
>> > >>
>> > >> super.user = gold
>> > >>
>> > >> server.host = cluster.tripham.vn
>> > >> server.port = 7112
>> > >>
>> > >> database.datasource = DBI:Pg:dbname=gold;host=cluster.tripham.vn
>> > >> # database.user = NONE
>> > >> # database.password = NONE
>> > >>
>> > >> response.chunksize = 100000
>> > >> # currency.precision = 0
>> > >>
>> > >> security.authentication = true
>> > >> # security.encryption = false
>> > >>
>> > >> account.autogen = true
>> > >> allocation.autogen = true
>> > >> # machine.autogen = false
>> > >>
>> > >> [root at cluster gold-2.2.0.0]# vim /opt/gold/etc/gold.conf
>> > >> Gold Client Config File
>> > >>
>> > >> server.host = cluster.tripham.vn
>> > >> server.port = 7112
>> > >> # server.backup = NONE
>> > >>
>> > >> security.authentication = true
>> > >> # security.encryption = false
>> > >> # security.token.type = symmetric
>> > >> # wire.protocol = SSSRMAP
>> > >>
>> > >> # response.chunking = false
>> > >> # response.chunksize = 0
>> > >> # currency.precision = 0
>> > >>
>> > >> # account.show =
>> > >> Id,Name,Amount,Projects,Users,Machines,Description
>> > >> # allocation.show =
>> > >> Id,Account,Active,StartTime,EndTime,Amount,CreditLimit,Deposited
>> > >> # balance.show =
>> > >> Id,Name,Amount,Reserved,Balance,CreditLimit,Available
>> > >> # job.show =
>> > >>
>> Id,JobId,User,Project,Machine,Queue,QualityOfService,Stage,Charge,Processors,Nodes,WallDuration,StartTime,EndTime,Description
>> > >>
>> > >> step8:
>> > >>
>> > >> [postgress at cluster postgresql-8.3.3]$ /usr/local/pgsql/bin/initdb
>> > >> -D
>> > >> /usr/local/pgsql/data
>> > >> [postgress at cluster postgresql-8.3.3]$ echo "host all all
>> > >> 172.16.1.70
>> > >> 255.255.255.255 trust">>/usr/local/pgsql/data/pg_hba.conf
>> > >> step9:
>> > >> [postgress at cluster postgresql-8.3.3]$
>> > >> /usr/local/pgsql/bin/postmaster -i
>> > >> -D /usr/local/pgsql/data
>> > >> LOG:  database system was shut down at 2011-09-28 19:58:45 ICT
>> > >> LOG:  autovacuum launcher started
>> > >> LOG:  database system is ready to accept connections
>> > >> [postgress at cluster postgresql-8.3.3]$
>> > >> /usr/local/pgsql/bin/postmaster -i
>> > >> -D /usr/local/pgsql/data >/var/log/pgsql 2>&1 &
>> > >> [1] 17250
>> > >> step10:
>> > >> [postgress at cluster postgresql-8.3.3]$
>> > >> /usr/local/pgsql/bin/createuser
>> > >> gold
>> > >> Shall the new role be a superuser? (y/n) n
>> > >> Shall the new role be allowed to create databases? (y/n) y
>> > >> Shall the new role be allowed to create more new roles? (y/n) y
>> > >> [postgress at cluster postgresql-8.3.3]$
>> > >> /usr/local/pgsql/bin/createdb gold
>> > >>
>> > >> step11:
>> > >> [root at cluster ~]# cd /etc/httpd/conf
>> > >> [root at cluster conf]# vim httpd.conf
>> > >> edit line
>> > >> #</Directory>
>> > >> <Directory "/var/www/cgi-bin">
>> > >>  Options ExecCGI
>> > >>  AddHandler cgi-script .cgi .pl
>> > >> </Directory>
>> > >> edit line
>> > >> #ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
>> > >> Alias /cgi-bin/ "/var/www/cgi-bin/gold"
>> > >>
>> > >> add line
>> > >> <VirtualHost 172.16.1.70:443>
>> > >>  DocumentRoot /var/www/cgi-bin
>> > >>  ServerName cluster.tripham.vn
>> > >>  ServerAdmin root at cluster.tripham.vn
>> > >>  ErrorLog logs/gold-error_log
>> > >>  TransferLog logs/gold-access_log
>> > >>  SSLEngine on
>> > >>  SSLCertificateFile /etc/httpd/conf/ssl.crt/gold-server.crt
>> > >>  SSLCertificateKeyFile /etc/httpd/conf/ssl.key/gold-server.key
>> > >>  SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
>> > >> </VirtualHost>
>> > >>
>> > >> step12:
>> > >> [root at cluster conf]# mkdir ssl.key
>> > >> [root at cluster conf]# openssl genrsa -out ssl.key/gold-server.key
>> > >> 1024
>> > >> Generating RSA private key, 1024 bit long modulus
>> > >> .......................++++++
>> > >> .++++++
>> > >> e is 65537 (0x10001)
>> > >> [root at cluster ssl.crt]# mkdir ssl.crt
>> > >> [root at cluster ssl.crt]# touch gold-server.crt
>> > >> [root at cluster ssl.crt]# chmod +x gold-server.crt
>> > >>
>> > >> step13:
>> > >> [root at cluster conf]# openssl req -new -key ssl.key/gold-server.key
>> > >> -x509
>> > >> -out ssl.crt/gold-server.crt
>> > >> You are about to be asked to enter information that will be
>> > >> incorporated
>> > >> into your certificate request.
>> > >> What you are about to enter is what is called a Distinguished Name
>> > >> or a DN.
>> > >> There are quite a few fields but you can leave some blank
>> > >> For some fields there will be a default value,
>> > >> If you enter '.', the field will be left blank.
>> > >> -----
>> > >> Country Name (2 letter code) [GB]:84
>> > >> State or Province Name (full name) [Berkshire]:vn
>> > >> Locality Name (eg, city) [Newbury]:hcm
>> > >> Organization Name (eg, company) [My Company Ltd]:icst
>> > >> Organizational Unit Name (eg, section) []:tech
>> > >> Common Name (eg, your name or your server's hostname) []:
>> > >> cluster.tripham.vn
>> > >> Email Address []:root at cluster.tripham.vn
>> > >>
>> > >> step14:
>> > >> [root at cluster conf]# /usr/sbin/apachectl restart
>> > >> [root at cluster conf]#
>> > >>
>> > >> step15:
>> > >> [root at cluster ~]# gchpasswd
>> > >> Can't locate Log/Log4perl.pm in @INC (@INC contains: /opt/gold/lib
>> > >> /opt/gold/lib/perl5 /usr/local/lib/perl5/5.10.0/x86_64-linux
>> > >> /usr/local/lib/perl5/5.10.0
>> > >> /usr/local/lib/perl5/site_perl/5.10.0/x86_64-linux
>> > >> /usr/local/lib/perl5/site_perl/5.10.0) at /opt/gold/lib/Gold.pm
>> > >> line 108.
>> > >> BEGIN failed--compilation aborted at /opt/gold/lib/Gold.pm line
>> > >> 108.
>> > >> Compilation failed in require at /opt/gold/bin/gchpasswd line 52.
>> > >> BEGIN failed--compilation aborted at /opt/gold/bin/gchpasswd line
>> > >> 52.
>> > >>
>> > >> step16:
>> > >> [root at cluster ~]# cd /home/gold/gold-2.2.0.0/
>> > >> [root at cluster gold-2.2.0.0]# cp bank.sql /usr/local/pgsql/
>> > >> [root at cluster gold-2.2.0.0]# chown postgress
>> > >> /usr/local/pgsql/bank.sql
>> > >> [postgress at cluster pgsql]$ chmod +x bank.sql
>> > >> [postgress at cluster pgsql]$ /usr/local/pgsql/bin/psql gold
>> > >> <bank.sql
>> > >> INSERT 0 1
>> > >> INSERT 0 1
>> > >> INSERT 0 1
>> > >> INSERT 0 1
>> > >> INSERT 0 1
>> > >> INSERT 0 1
>> > >> INSERT 0 1
>> > >>
>> > >> step17:
>> > >> [postgress at cluster pgsql]$ /opt/gold/sbin/goldd
>> > >> Can't locate Log/Log4perl.pm in @INC (@INC contains: /opt/gold/lib
>> > >> /opt/gold/lib/perl5 /usr/local/lib/perl5/5.10.0/x86_64-linux
>> > >> /usr/local/lib/perl5/5.10.0
>> > >> /usr/local/lib/perl5/site_perl/5.10.0/x86_64-linux
>> > >> /usr/local/lib/perl5/site_perl/5.10.0 .) at /opt/gold/sbin/goldd
>> > >> line 52.
>> > >> BEGIN failed--compilation aborted at /opt/gold/sbin/goldd line 52.
>> > >>
>> > >> --
>> > >> Nguyen Truong Co
>> > >> Institute for Computational Science and Technology
>> > >> Researcher of Life Science Lab
>> > >>
>> > >>
>> > >> _______________________________________________
>> > >> gold-users mailing list
>> > >> gold-users at supercluster.org
>> > >> http://www.supercluster.org/mailman/listinfo/gold-users
>> > >>
>> > >>
>> > >>
>> > >> _______________________________________________
>> > >> gold-users mailing list
>> > >> gold-users at supercluster.org
>> > >> http://www.supercluster.org/mailman/listinfo/gold-users
>> > >>
>> > >>
>> > >
>> > >
>> > > --
>> > > Nguyen Truong Co
>> > > Institute for Computational Science and Technology
>> > > Researcher of Life Science Lab
>> > > _______________________________________________
>> > > gold-users mailing list
>> > > gold-users at supercluster.org
>> > > http://www.supercluster.org/mailman/listinfo/gold-users
>> >
>> >  ----------------------
>> >  Steve Crusan
>> >  System Administrator
>> >  Center for Research Computing
>> >  University of Rochester
>> >  https://www.crc.rochester.edu/
>> >
>> >
>> > -----BEGIN PGP SIGNATURE-----
>> > Version: GnuPG/MacGPG2 v2.0.17 (Darwin)
>> > Comment: GPGTools - http://gpgtools.org
>> >
>> > iQEcBAEBAgAGBQJOg1T/AAoJENS19LGOpgqKzjcH/1iuUHK7V0toQ2K4kCdB1y+m
>> > m8knMCPySEhmWGd7TiaAMdlm1Wg00HzPcGO47InX8pQ3dTJWXmSb36l8M1RMBK3O
>> > Ujz1ILdV0pd5wSRZK6Yl8upOdZDHzSe3YQlSDWuF8plA0T70n4pl5kCphjrKLXs5
>> > /GUHIvzmD+vMwVRscUO168+wNynq+y7Wdr75d88U02/jPWo08rSYPDWLU5XSMOWO
>> > SuL+kstQce+EN9KxGYgvtJ+7knTlWUOxT4acNnQTQJZqAQDKy1fJXPAYqjKcgcwz
>> > mixnlFrN9Kf2UYmLmF9NxHUfVU9FiclJkFzSiyUvN9whwdxXLy6BZnocNSEHKes=
>> > =Eus7
>> > -----END PGP SIGNATURE-----
>> > _______________________________________________
>> > gold-users mailing list
>> > gold-users at supercluster.org
>> > http://www.supercluster.org/mailman/listinfo/gold-users
>> >
>> _______________________________________________
>> gold-users mailing list
>> gold-users at supercluster.org
>> http://www.supercluster.org/mailman/listinfo/gold-users
>>
>
>
>
> --
> Nguyen Truong Co
> Institute for Computational Science and Technology
> Researcher of Life Science Lab
>
>
> _______________________________________________
> gold-users mailing list
> gold-users at supercluster.org
> http://www.supercluster.org/mailman/listinfo/gold-users
>
>
>
> _______________________________________________
> gold-users mailing list
> gold-users at supercluster.org
> http://www.supercluster.org/mailman/listinfo/gold-users
>
>


-- 
Nguyen Truong Co
Institute for Computational Science and Technology
Researcher of Life Science Lab
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.supercluster.org/pipermail/gold-users/attachments/20111002/41522249/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot.png
Type: image/png
Size: 94851 bytes
Desc: not available
Url : http://www.supercluster.org/pipermail/gold-users/attachments/20111002/41522249/attachment-0001.png 


More information about the gold-users mailing list